Publications

BONNIER G. et LE FRIOUS F., « Traçabilité des instruments de mesure de température », Techniques de l’ingénieur, RC2 Mesures physiques, Dossier n° R2511, 7p.

FELLMUTH B. (PTB), HILL K.D. (NRC), BLOEMBERGEN P. (NMIJ), DE GROOT M. (NMi-VSL), HERMIER Y. (INM-CNAM), MATVEYEV M. (VNIIM), POKHODUN A. (VNIIM), RIPPLE D. (Chairman, NIST) et STEUR P.P.M. (IMGC), Methodologies for the estimation of uncertainties and the correction of fixed-point temperatures attributable to the influence of chemical impurities, Rapport du CCT, CCT/05-08.

FELLMUTH B., WOLBER L., HERMIER Y., PAVESE F., STEUR P.P.M., PERONI I., SZMYRKA-GRZEBYK A., LIPINSKI L., TEW W.L., NAKANO T., SAKURAI H., TAMURA O., HEAD D., HILL K.D. et STEELE A.G., Isotopic and other influences on the realization of the triple point of hydrogen, Metrologia, 42, 2005, 171–193.

FISCHER J. (Chairman), SADLI M., BALLICO M., BATTUELLO M., PARK C.W., SAUNDERS P., ZUNDONG Y., YOON H., VAN DER HAM E., SAKUMA F., MACHIN G., FOX N. (CCPR observer), LI W., UGUR S., MATVEYEV M., BLOEMBERGEN P. (co-opted) et YAMADA Y. (co-opted), Working Group 5 Report to CCT, Rapport du CCT, CCT/05-10.

PITRE L., MOLDOVER M.R. et TEW W.L, Acoustic thermometry: new results from 273 K to 77 K and progress towards 4 K, Metrologia, 43, 2006, 142-162.

RENAOT E., HERMIER Y. et BONNIER G., Key Comparison Euromet T-K3”, Rapport pour le CCT, décembre 2005.

RIPPLE D.C., GAM K.S., HERMIER Y., HILL K.D., RUSBY R.L., STEELE A.G., STEUR P.P.M., STOCK M., STROUSE G.F. et WHITE D.R., Summary of Facts Relating to Isotopic Effects and the Triple Point of Water: Report of the ad hoc Task Group on the Triple Point of Water, Rapport du CCT, CCT/05-07.

SCHÖTTL S., RUSBY R.L., PITRE L. et HERMIER Y., Evaluation of SRD1000 superconductive reference devices. J. Low Temp. Phys., 138, 3-4, 2005, 941-946.

STEUR P.P.M., HERMIER Y., GAM K.S., HILL K.D., FELLMUTH B., POKHODUN A.I. et RIPPLE D.C., Isotopic Effects in the Hydrogen Fixed Points”, Rapport du CCT, CCT/05-06.

WHITE D.R., BONNIER G., DIRIL A., ARAI M., BALLICO M., CHIMENTI V., DURIS S., FILIPE E., IVANOVA A., KARTAL A. DOGAN, MENDEZ-LANGO E., MEYER C., PAVESE F., PERUZZI A., RENAOT E., RUDTSCH S., STOCK M. et UGUR S., Working Group 3 Report to CCT, Rapport du CCT, CCT/05-15.

Communications

CHARDONNET Ch., DAUSSY Ch., BRIAUDEAU S., AMY-KLEIN A., LOPEZ O., HERMIER Y., BONNIER G., RICHARD A., RENAOT E. et BORDÉ Ch.J. Determination of the Boltzmann constant by Doppler broadening measurements in equilibrium gas cell: feasibility, Euromet project - Workshop on methods for new determinations of the Boltzmann constant, PTB, Berlin, Allemagne, 20-21 janvier 2005.

MORICE R., « Couples thermoélectriques : caractéristiques et étalonnage », Journée technique ATTT, Paris, France, mars 2005.

PITRE L., « Le Thermomètre Acoustique à l’INM/CNAM-NIST, Vers la fin des échelles de température ? », Séminaire au CNAM, Paris, France, mars 2005.

LE FRIOUS F., « Vers une nouvelle génération de points fixes de température », Journée des métrologues du LNE, Paris, France, 5 avril 2005.

MORICE R., “Metal-carbon eutectic cells for contact thermometry applications”, Workshop on High Temperature Fixed Points, PTB, Berlin, Allemagne, avril 2005.

PITRE L.,The Spherical Acoustic Thermometer: The end of the temperature scale?, Séminaire au NPL, Teddington, Royaume-Uni, avril 2005.

SADLI M., “Progress in the field of metal-carbon eutectic research at LNE-INM/CNAM, Workshop on High Temperature Fixed Points, PTB, Berlin, Allemagne, avril 2005.

GUINET M., DAUSSY Ch., BRIAUDEAU S., AMY-KLEIN A., HERMIER Y., BORDE Ch. J. et CHARDONNET Ch., « Mesure directe de la constante de Boltzmann par une méthode de métrologie des fréquence », OPTRO 2005, Paris, France, 9-12 mai 2005.

DAUSSY Ch., BRIAUDEAU S., GUINET M., AMY-KLEIN A., HERMIER Y., BORDÉ Ch.J. et CHARDONNET Ch., Optical determination of the Boltzmann constant : first results”, 17th International Conference On Laser Spectroscopy ICOLS 05, Cairngorms National Park, Ecosse, 19-24 juin 2005.

PITRE L., The Spherical Acoustic Thermometer: The end of the temperature scale?”, Séminaire BIPM, France, juin 2005.

ABDELAZIZ Y., MEGAHED F. et RENAOT E., Comparison of the Egyptian and French standards at the silver fixed points (961,78 °C)”, 12e Congrès international de métrologie, Lyon, France, 20-23 juin 2005.

BONNIER G., RENAOT E., HERMIER Y., « Une nouvelle approche des points fixes de température » 12e Congrès international de métrologie, Lyon, France, 20-23 juin 2005.

ELGOURDOU M., RENAOT E., VALIN M., BONNIER G. « Un nouveau caloduc régulé en pression pour notre amplificateur de température » 12e Congrès international de métrologie, Lyon, France, 20-23 juin 2005.

IVANOVA A., GERASIMOV S., ELGOURDOU M., RENAOT E. « Les particularités des transitions de phase de l’eutectique Ga-Sn », 12e Congrès international de métrologie, Lyon, France, 20-23 juin 2005.

GUINET M. , DAUSSY Ch. , BRIAUDEAU S. , AMY-KLEIN A. , HERMIER Y. , Ch.J. BORDE, CHARDONNET Ch., « Vers une mesure optique de la constante de Boltzmann : Premiers résultats », 12e Congrès international de métrologie, Lyon, France, 20-23 juin 2005.

HERMIER Y., « Comparaison des références nationales au point triple de l’argon (T90 = -89,344 2 °C) dans le cadre du projet EUROMET 502 », 12e Congrès international de métrologie, Lyon, France, 20-23 juin 2005.

MACHIN G., ANHALT K., BEYNON G., EDLER F., FOURREZ S., HARTMANN J., JIMENO LARGO P., LOWE D., MORICE R., SADLI M.et VILLAMANAN M., Future Perspectives for high temperature Metrology from the FP5 Himert Project”, 12e Congrès international de métrologie, Lyon, France, 20-23 juin 2005.

RIDOUX P., « Etalonnage au LNE des thermomètres infrarouges à émissivité fixe », 12e Congrès international de métrologie, Lyon, France, 20-23 juin 2005.

SADLI M., ROUGIÉ B., BRIAUDEAU S., BOURSON F. et FANJEAUX M., « Exactitude et traçabilité des hautes températures : Améliorations et nouvelles réalisations », 12e Congrès international de métrologie, Lyon, France, 20-23 juin 2005.

MORICE R., FAVREAU J.-O., DEUZE T. et FILTZ J.-R., A thermocouple application of metal-carbon eutectic fixed points at LNE”, International Conference on Instrumentation, Control and Information Technology, Okayama, Japon, 8-10 août 2005.

MORICE R., “Metal-carbon eutectics for high temperature contact thermometry: overview of research, nexts steps in Europe”, Présentation invitée au NMIJ, Japon, août 2005.

MORICE R., “Metal-carbon eutectics for high temperature contact thermometry”, Journée technique des laboratoires de la Chaîne nationale d’étalonnage japonaise, NMIJ, Japon, août 2005.

GUINET M., DAUSSY C., BRIAUDEAU S., AMY-KLEIN A., HERMIER Y., BORDE C.J. et CHARDONNET C. « Premiers résultats de mesure optique de la constante de Boltzmann par métrologie des fréquences », 9e Colloque sur les lasers et l’optique quantique, Dijon, France, 7-9 septembre 2005.

DAUSSY Ch., GUINET M., BRIAUDEAU S., AMY-KLEIN A., HERMIER Y., BORDE Ch.J. et CHARDONNET Ch., Optical determination of the Boltzmann constant: first results, 19th HRMS, Salamanque, Espagne, 11-16 septembre 2005.

ANHALT K., HARTMANN J., LOWE D., MACHIN G., SADLI M., YAMADA Y. et BLOEMBERGEN P., “A comparison of Co-C, Pd-C, Pt-C, Ru-C and Re-C eutectic fixed points independently manufactured by three different institutes”, 9th International Conference on New Developments and Applications in Optical Radiometry (Newrad), Davos, Suisse, 17-19 octobre 2005.

ANHALT K., HARTMANN J., LOWE D., MACHIN G., SADLI M. et YAMADA Y., “Thermodynamic temperature determinations of Co-C, Pd-C, Pt-C and Ru-C eutectic fixed points cells”, 9th International Conference on New Developments and Applications in Optical Radiometry (Newrad), Davos, Suisse, 17-19 octobre 2005.

SADLI M., “Scale realisation and research in the high-temperature field at LNE-INM/CNAM”, Séminaire à l’UME, Gebze, Turquie, décembre 2005.

Publications

BOURSON F., FANJEAUX M., ROUGIE B. et SADLI M., « Caractérisation et étalonnage d’un pyromètre de référence pour la mesure des hautes températures », Revue française de métrologie, 6, 2006, 3-8.

HERMIER Y., « Les références de température et l’Échelle internationale de Température de 1990 (EIT-90) », AFNOR, http://www.metrologie.afnor.org, avril 2006.

PITRE L., MOLDOVER M.R. et TEW W.L., “Acoustic thermometry: new results from 273 K to 77 K and progress towards 4 K”, Metrologia, 43, 2006, 142-162.

RENAOT E., HERMIER Y., VALIN M. et BONNIER G., “Comparison of the realisations of the ITS-90 from 83,805 8 K to 692,677 K”, Rapport de la comparaison clé EUROMET.T-K3, site web du BIPM (www.kcdb.bipm.org) et Metrologia, 44, Tech. Supp 03001, 2007.

RENAOT E. et al., “Comparison of realization of the triple-point of water”, Rapport final du projet Euromet 714, site web d’Euromet (www.euromet.org).

SADLI M., « Échelle internationale de température : EIT-90 », Techniques de l’Ingénieur, Dossier R2510, septembre 2006.

STOCK M., SOLVE S., DEL CAMPO D., CHIMENTI V., MENDEZ-LANGO E., LIEDBER H., STEUR P.P.M., MARCARINO P., DEMATTEIS R., FILIPE E., LOBO I., KANG K.H., GAM K.S., KIM Y.-G., RENAOT E., BONNIER G., VALIN M., WHITE R., DRANSFIELD T.D., DUAN Y., XIAOKE Y., STROUSE G., BALLICO M., SUKKAR D., ARAI M., MANS A., DE GROOT M., KERKHOF O., RUSBY R., GRAY J., HEAD D., HILL K., TEGELER E., NOATSCH U., DURIS S., KHO H.Y., UGUR S., POKHODUN A. et GERASIMOV S.F., Final report on CCT-K7: Key comparison of water triple point cells”, Metrologia, 43, Tech. Suppl. 03001, 2006.

Communications

SADLI M. et MORICE R., « Les eutectiques métal-carbone : Bilan du projet HIMERT et perspectives pour la métrologie des hautes températures », Séminaire du Cnam, Pole de recherche Electronique, Systèmes Physiques, Métrologie, Saint-Denis, France, 20 janvier 2006.

BEAULIEU C., MORICE R. et FILTZ J.-R., « Traçabilité des mesures de température de surface », International Conference on Metrology, CAMET, Casablanca, Maroc, 4-6 avril 2006.

SADLI M., “Mesure de température par rayonnement : est-ce si difficile ?”, International Conference on Metrology, CAMET, Casablanca, Maroc, 4-6 avril 2006.

FILTZ J.-R., MORICE R., RIDOUX P., HAY B., HAMEURY J., JOUIN D. et Favreau J.-O., “Overview of recent developments at LNE in the field of thermal metrology at high temperature, Workshop on High Temperature Fixed Points, organisé par le LNE, Paris, France, 6-7 juin 2006.

MORICE R., EDLER F. et MACHIN G., “A research project to develop high temperature fixed points for contact thermometry, Workshop on High Temperature Fixed Points, organisé par le LNE, Paris, France, 6-7 juin 2006.

RIDOUX P. et MORICE R., “Research plans at LNE for dissemination scale in thermometry and radiometry using metal-carbon eutectics, Workshop on High Temperature Fixed Points, organisé par le LNE, Paris, France, 6-7 juin 2006.

SADLI M., “Post-HIMERT research at LNE-INM in the field of high temperatures”, Workshop on High Temperature Fixed Points, organisé par le LNE, Paris, France, 6-7 juin 2006.

SADLI M., HARTMANN J., SCHILLER S. et BRUBEIT B., “Thermal effects in HTBB 3200 furnace on metal-carbon eutectic implementation”, Workshop on High Temperature Fixed Points, organisé par le LNE, Paris, France, 6-7 juin 2006.

PITRE L., “New determination of the Boltzmann constant with an improved acoustic method: toward a re-definition of the Kelvin”, Séminaire invité au NPL, Teddington, Royaume-Uni, 28 septembre 2006.

FAVREAU J.O. et MORICE R., « Etat des lieux sur les nouvelles perspectives d’étalonnage des thermocouples aux températures élevées », Mesurexpo 2006 - Forum Mesure, Paris, France, 17-19 octobre 2006.

JOUIN D., « Etalonnage des T.R.P.E. aux points fixes de l’EIT-90 », Mesurexpo 2006 - Forum Mesure, Paris, France, 17-19 octobre 2006.

PITRE L., “New determination of the Boltzmann constant with an improved acoustic method: toward a re-definition of the Kelvin”, Workshop on Progress in determining the Boltzmann constant, organisé par le PTB, Berlin, Allemagne, 19 octobre 2006.

BONNIER G., MORICE R., FLEURENCE N., BARBARAS J.-C., LE SANT V., RIDOUX P. et FILTZ J.-R., , “Temperature fixed points and thermal effects, Workshop Euromet project 732: Toward more accurate temperature fixed points, organisé par le LNE-INM/CNAM, St-Denis, France, 23-24 novembre 2006.

HERMIER Y., Past improvements of the LNE-INM type argon device and future ways”, Workshop Euromet project 732 : Toward more accurate temperature fixed points, organisé par LNE-INM/CNAM, Saint-Denis, France, 23-24 novembre 2006.

HERMIER Y., “Mercury triple point: the isotopic composition and the hydrostatic head correction”, Workshop Euromet project 732 : Toward more accurate temperature fixed points, LNE-INM/CNAM, Saint-Denis, France, 23-24 novembre 2006.

LE SANT V., MORICE R., BARBARAS J.-C., BONNIER G., RIDOUX P. et FILTZ J.-R., “Modelling of quasi-adiabatic conditions for realizing the indium fixed-point, Workshop Euromet project 732: Toward more accurate temperature fixed points, organisé par le LNE-INM/CNAM, St-Denis, France, 23-24 novembre 2006.

MORICE R., BONNIER G., BARBARAS J.-C., FLEURENCE N., LE SANT V., RIDOUX P. et FILTZ J.-R., “Development of a new device for realizing the indium FIXED point in quasi-adiabatic conditions, Workshop Euromet project 732: Toward more accurate temperature fixed points, organisé par le LNE-INM/CNAM, St-Denis, France, 23-24 novembre 2006.

RENAOT E., “Influence of impurities and method of filling on the aluminum fixed point”, Workshop Euromet project 732: Toward more accurate temperature fixed points, organisé par LNE-INM/CNAM, Saint-Denis, France, 23-24 novembre 2006.

GUIANVARC’H C., “Determination of the Boltzmann constant: acoustic field in the quasi-spherical resonator”, Workshop on Progress in determining the Boltzmann constant, organisé par le LNE-INM/CNAM, Saint-Denis, France, 30 novembre 2006.

PITRE L., “New determination of the Boltzmann constant with an improved acoustic method: Toward an optimisation of the ressources at European level”, Workshop on Progress in determining the Boltzmann constant, organisé par le LNE-INM/CNAM, Saint-Denis, France, 30 novembre 2006.

SPARASCI F., “Metallic cell for water triple point”, Workshop on Progress in determining the Boltzmann constant, organisé par le LNE-INM/CNAM, Saint-Denis, France, 30 novembre 2006.

TRUONG D., “Design method for a quasi-sphere with CAD”, Workshop on Progress in determining the Boltzmann constant, organisé par le LNE-INM/CNAM, Saint-Denis, France, 30 novembre 2006.

TRUONG D., “Repair of the damaged joint surface of a copper sphere”, Workshop on Progress in determining the Boltzmann constant, organisé par le LNE-INM/CNAM, Saint-Denis, France, 30 novembre 2006.

Publications

DAUSSY C., GUINET M., AMY-KLEIN A., DJERROUD K., HERMIER Y., BRIAUDEAU S., BORDÉ CH. et CHARDONNET CH., “Direct determination of the Boltzmann Constant by optical method, Phys Rev Lett, 98, 2007, 250801.

FISCHER J., GERASIMOV S., HILL K.D., MACHIN G., MOLDOVER M., PITRE L., STEUR P., STOCK M., TAMURA O., UGUR H., WHITE D.R., YANG I., et ZHANG J., “Preparative steps towards the new definition of the Kelvin in terms of Boltzmann constant”, International Journal of thermophysics, 28, 6, 2007, 1753-1765.

GERASIMOV S., POKHODUN A. et RENAOT E., “The influence of crucible material on aluminium composition, International Journal of thermophysics, 28, 6, 2007, 1957-1963.

HEYER D., NOATSCH U., TEGELER E., ANAGNOSTOU M., TURZO-ANDRAS E., ANTONSEN I., AUGEVICIUS V., BOJKOVSKI J., BRONNUM A., CHIMENTI V., DURIS S., FILIPE E., GAITA S., GRAY J., HEAD D., GRUDNIEWICZ E., IVARSSON J., KALEMCI M., KERKHOF O., LOBO I., NEMETH S., POKHODUN A., RANOSTAJ J., RENAOT E., ROSENKRANZ P., SMID M., STEUR P., STEINER A., VALIN M., VELIKI T. et WECKSTRÖM T., “Intercomparison of the realization of the ITS-90 at the freezing points of Al and Ag between European NMIs”, International Journal of thermophysics, 28, 6, 2007, 1964-1975.

MACHIN G., BLOEMBERGEN P., HARTMANN J., SADLI M. et YAMADA Y., A concerted international project to establish high-temperature fixed points for primary thermometry”, International Journal of thermophysics, 28, 6, 2007, 1976-1982.

RENAOT E., HERMIER Y., VALIN M.H., BONNIER G., ADUNK F., VAN DER LINDEN A., DOBRE M., ŠMID M., BRONNUM A., WECKSTROM T., TEGELER E., NOATSCH U., ANAGNOSTOU M., TURZO-ANDRAS E., NEMETH S., WHITE M., MARCARINO P., STEUR P., PAUZHA A., AUGEVICIUS V., DE GROOT M., NIELSEN J., HELGESEN F., ROSZKOWSK W.I, GRUDNIEWICZ E., KUNA R., FILIPE E., LOBO I., GAITA S., CHIMENTI V., IVARSSON J., DURIS S., RANOSTAJ J., BOJKOVSKI J., STEINER A., UGUR S., GRAY J., BRUCE S., RUSBY R. et HEAD D., “Intercomparison of the Realisations of the ITS-90 from 83.805 8 K to 692.677 K among European NMIs, Metrologia, 44, 2007, 03001.

WHITE D.R., BALLICO M., DEL CAMPO D., DURIS S., FILIPE E., IVANOVA A., KARTAL DOGAN A., MENDEZ-LANGO E., MEYER C.W., PAVESE F., PERUZZI A., RENAOT E., RUDTSCH S. et YAMAZAWA K., “Uncertainties in the Realisation of the SPRT Sub-ranges of the ITS-90”, International Journal of thermophysics, 28, 6, 2007, 1868-1881.

Communications

GUIANVARC’H C. et PITRE L., « Vers une redefinition du Kelvin : nouvelle détermination de la constante de Boltzmann par mesures de fréquences de résonances acoustiques », Séminaire CNAM, Paris, 12 janvier 2007.

RENAOT E., « Les capteurs de température : technologie, procédure d’étalonnage, estimation des incertitudes », Séminaire Ge Sensing : Vérification et Etalonnage en milieu industriel, Lyon, France, 31 janvier 2007.

GUIANVARC’H C., “Electrostatic transducers: Condenser microphones and acoustic probe”, Workshop Boltzmann by acoustic method, NPL, Teddington, Royaume-Uni, 27 mars 2007.

PITRE L., “New determination of the Boltzmann constant with an improved acoustic method at the LNE-INM/CNAM: New data”, Workshop Boltzmann by acoustic method, NPL, Teddington, Royaume-Uni, 27 mars 2007.

AHMED M.G., ALI K. et HERMIER Y., “Carbon dioxyde triple point using different realization techniques, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

BOJKOVSKI J, FISCHER J., MACHIN G., PAVESE F., PERUZZI A., RENAOT E. et TEGELER E., “Roadmaps for thermal metrology”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

BRIAUDEAU S., HERMIER Y., RENAOT E., GUINET M., DAUSSY C., CHARDONNET CH. et BORDÉ Ch.; “Boltzmann constant determination and Kelvin definition with Doppler broadened laser spectroscopy”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

EDLER F., MORICE R. et PEARCE J., “Construction and investigation of Pt/Pd thermocouples in the framework of the Euromet project 857”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

ELGOURDOU M., RENAOT E. et ABDELAZIZ Y.A., “Temperature amplifier”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

FISCHER J., GERASIMOV S., HILL K.D., MACHIN G., MOLDOVER M., PITRE L., STEUR P., STOCK M., TAMURA O., UGUR H., WHITE D.R., YANG I., et ZHANG J., “Preparative steps towards the new definition of the Kelvin in terms of Boltzmann constant”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

GERASIMOV S., POKHODUN A. et RENAOT E., “The influence of crucible material on aluminium composition”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

HEYER D., NOATSCH U., TEGELER E., ANAGNOSTOU M., TURZO-ANDRAS E., ANTONSEN I.,   AUGEVICIUS V., BOJKOVSKI J., BRONNUM A., CHIMENTI V., DURIS S., FILIPE E., GAITA S., GRAY J., HEAD D., GRUDNIEWICZ E., IVARSSON J., KALEMCI M., KERKHOF O., LOBO I., NEMETH S., POKHODUN A., RANOSTAJ J., RENAOT E., ROSENKRANZ P., SMID M., STEUR P., STEINER A., VALIN M., VELIKI T. et WECKSTRÖM T., “Intercomparison of the realization of the ITS-90 at the freezing points of Al and Ag between European NMIs”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

JOLY J., RIDOUX P., HAMEURY J., LIÈVRE M. et FILTZ J.-R., “Development of a Multiband near-to-far Infrared Radiance COmparator (MIRCO)”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

LE SANT V., MORICE R. et FAILLEAU G., “Modelling of Transient Heat Transfer in Temperature Fixed points: Indium cell design”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

MACHIN G., BLOEMBERGEN P., HARTMANN J., SADLI M. et YAMADA Y., A concerted international project to establish high-temperature fixed points for primary thermometry”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

MATVEYEV M.S., SADLI M., SILD YU A., POKHODUN A.I. et BOURSON F., Experience of construction and study of Pt-C eutectic in VNIIM and cooperation with LNE-INM”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

MORICE R., BONNIER G., BARBARAS J.-CH., FLEURENCE N., LE SANT V., RIDOUX P. et FILTZ J.-R., “Realisation of ITS-90 metal fixed-points by a calorimetric method: application to the indium point”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

MORICE R., EDLER F., PEARCE J., MACHIN G., FISCHER J. et FILTZ J.-R., “High temperature fixed point facilities for improved thermocouple calibration – Euromet project 857”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

PAVESE F., FELLMUTH B., HEAD K.D., HERMIER Y., LIPINSKI L., NAKATO T., PERUZZI A., SAKURAI H., SMYRKA-GRZEBYK A., STEELE A.G., STEUR P.M., TAMURA O., TEW W.L., WALKIER S. et WOLBER L., “Progress toward the determination of T-x for neon isotopes”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

RENAOT E., HERMIER Y., VALIN M.H., BONNIER G., ADUNK A.F., VAN DER LINDEN A., DOBRE M., ŠMID M., BRONNUM A., WECKSTROM T., TEGELER E., NOATSCH U., ANAGNOSTOU M., TURZO-ANDRAS E., NEMETH S., WHITE M., MARCARINO P., STEUR P., PAUZHA A., AUGEVICIUS V., DE GROOT M., NIELSEN J., HELGESEN F., ROSZKOWSKI W., GRUDNIEWICZ E., KUNA R., FILIPE E., LOBO I., GAITA S., CHIMENTI V., IVARSSON J., DURIS S., RANOSTAJ J., BOJKOVSKI J., STEINER A., UGUR S., GRAY J., BRUCE S., RUSBY R. et HEAD D., “Intercomparison of the Realisations of the ITS-90 from 83.805 8 K to 692.677 K among European NMIs”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

RENAOT E., VALIN M.H. et ELGOURDOU M., “Analysis of the Comparison of TPW realizations in Europe in the light of the CCT recommendation 2 (CI-2005)”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

RENAOT E., VALIN M.H. et ELGOURDOU M., “Influence of the impurities and filling protocol on the Aluminium fixed point”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

SADLI  M., ANHALT K., BOURSON F., SCHILLER S. et HARTMANN J.,Thermal effects in HTBB-3200pg furnace on metal-carbon eutectic point implementation, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

SADLI M., PEHLIVAN O., BOURSON F., DIRIL A. et OZCAN K., Collaboration on Co-C eutectic fixed point construction and characterisation between UME and LNE-INM/Cnam, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

SAUNDERS P., FISCHER J., SADLI M., BATTUELLO M., PARK C.W., ZUNDONG Y., YOON H., LI W., VAN DER HAM E., SAKUMA F., ISHII J., BALLICO M., MACHIN G., FOX N., HOLLANDT J., MATVEYEV M., BLOEMBERGEN P. et UGUR S., Uncertainty Budgets for Calibration of Radiation Thermometers Below the Silver Point, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

SPARASCI F., PITRE L. et HERMIER Y., “Realization of the triple point of water in metallic sealed cells at the LNE-INM/CNAM: progress report, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

WHITE D.R., BALLICO M., CHIMENTI V., DURIS S., FILIPE E., IVANOVA A., KARTAL DOGAN A., MENDEZ-LANGO E., MEYER C., PAVESE F., PERUZZI A., RENAOT E., RUDTSCH S. et YAMAZAWA K., Uncertainties in the realization of the SPRT Sub-ranges of the ITS-90 - CCT-WG3”, 10th International Symposium on Temperature and Thermal Measurements in Industry and Science (Tempmeko-2007), Lake Louise, Canada, 21-25 mai 2007.

AHMED M.G., ALI K. et HERMIER Y., « Réalisation d’un étalon thermométrique au point triple du dioxyde de carbonne dans le cadre d’une collaboration scientifique entre les laboratoires nationaux égyptien et français », 13e Congrès international de métrologie, Lille, France, 18-21 juin 2007.

BEAULIEU C., JOUIN D., SAMARAN M., RIDOUX P. et FILTZ J.-R., « Métrologie des températures : Évolution des besoins et tendances du marché », 13e Congrès international de métrologie, Lille, France, 18-21 juin 2007.

ELGOURDOU M. et RENAOT E., «Vers une amélioration significative des incertitudes d’étalonnage des thermomètres entre 600 °C et 1 000 °C », 13e Congrès international de métrologie, Lille, France, 18-21 juin 2007.

FAVREAU J.-O., OLLIER F., JOUIN D., RIDOUX P. et FILTZ J.-R., « Banc d'étalonnage des thermomètres auriculaires au LNE », 13e Congrès international de métrologie, Lille, France, 18-21 juin 2007.

JOLY J., RIDOUX P. et HAMEURY J., « Développement d'un comparateur de luminance à filtres interférentiels pour l'étalonnage de corps noirs industriels », 13e Congrès international de métrologie, Lille, France, 18-21 juin 2007.

PITRE L., GUIANVARC’H C., SPARASCI F., TRUONG D., RENAOT E. et RICHARD A., “New determination of the Boltzmann Constant with ab amproved acoustic method : toward a redifinition of the Kelvin”, 13e Congrès international de métrologie, Lille, France, 18-21 juin 2007.

PITRE L., GUIANVARC’H C., SPARASCI F., TRUONG D. et RICHARD A.; Progress toward an acoustic/microwave determnation of Boltzmann Constant at the LNE-INM/CNAM”, 13e Congrès international de métrologie, Lille, France, 18-21 juin 2007.

RENAOT E., VALIN M.H., ELGOURDOU M. et HERMIER Y., « Comparaison des réalisations de l’EIT-90 entre 83,805 8 K et 692,677 K, comparaison clé Euromet T-K3 », 13e Congrès international de métrologie, Lille, France, 18-21 juin 2007.

SADLI M., ROUGIE B., BOURSON F. et BRIAUDEAU S., « Hautes températures : Nouveaux points fixes et température thermodynamique », 13e Congrès international de métrologie, Lille, France, 18-21 juin 2007.

DJERROUD K., DAUSSY CH., AMY-KLEIN A., BRIAUDEAU S., HERMIER Y., BORDE CH. et CHARDONNET Ch., « Détermination de la constante de Boltzmann par méthode spectroscopique », 10e Colloque sur les lasers et l’optique quantique (Colloq’10), Grenoble, France, 2-5 juillet 2007.

MORICE R., RIDOUX P. et FILTZ J.-R., “Improved measurements in contact thermometry at high temperature through practical fixed points”, NCSLI’2007 Conference - Metrology’s Impact on Products ans Services, Saint Paul, Minnesota, Etats-Unis d’Amérique, 29 juill.-2 août 2007.

GUIANVARC’H C., PITRE L., BRUNEAU M. et BRUNEAU A-M., Acoustic field modelling in a quasi-sphèrical resonator for determination of the Boltzmann constant, 19th international Congress on acoustics, Madrid, Espagne, 2-7 septembre 2007.

PITRE L., “New determination of the Boltzmann constant with an improved acoutic method at the LNE-INM/Cnam: Progress report”, Séminaire au NIST, Gaithersburg, Etats-Unis d’Amérique, 6 septembre 2007.

GUIANVARC’H C., “Acoustic field in a spherical resonator filled with a dissipative gaz”, Workshop Boltzmann by acoustic method, INRIM, Turin, Italie, 20-21 septembre 2007.

ELGOURDOU M., RENAOT E. et MERLONE A., « L’amplificateur de température : une technologie innovante des caloducs régulés en pression pour l’étalonnage des TRP et des thermocouples », 4e Colloque interdisciplinaire en instrumentation (C2I 2007), Nancy, France, 17-19 oct. 2007, Hermes Science, Ed Lavoisier, 112-120.

LE SANT V. et FAILLEAU G., Thermal modelling of devices realizing temperature fixed-points, Conférence européenne Comsol, Grenoble, France, 23-24 octobre 2007.

RENAOT E., « Les capteurs de température : technologie, procédure d’étalonnage, estimation des incertitudes », Forum métrologie 2007, Comité africain de métrologie, Dakar, Sénégal, 30-31 octobre 2007.

Publications

AHMED M.G., ALI K. et HERMIER Y., “Comparison of Argon triple point between NIS-Egypt and LNE-INM/CNAM-France”, MAPAN, J. Metrology Society of India, 23, 1, 2008, 3-9.

BOJKOVSKI J., FISCHER J., MACHIN G., PAVESE F., PERUZZI A., REANAOT E. et TEGELER E., “A Roadmap for thermal metrology”, Int. J. Thermophys., 29, 1, 2009, 1-8, en ligne en juin 2008.

BRIAUDEAU S., ROUGIE B., SADLI M., RICHARD A. et COUTIN J.-M., “Optical diffraction corrections in radiometric thermodynamic temperature determination”, Int J. Thermophys., 2009, 30, 155-166, en ligne en décembre 2008.

EDLER F., MORICE R. et PEARCE J., “Construction and investigation of Pt/Pd thermocouples in the framework of the Euramet project 857”, Int. J. Thermophys., 29, 1, 2008, 199-209, en ligne en janvier 2008.

ELGOURDOU M., GEORGIN E. et MARTIN C., “The gas controlled heat-pipe in metrology”, Acta metrologia sinica, 29, 4A, 2008.

FAILLEAU G., LE SANT V., MORICE R. et RIDOUX P., “Thermal assessment of fixed point cell by numerical modelling”, Acta metrologica sinica, 29, 4A, 2008.

GUIANVARC’H C., PITRE L., SPARASCI F., GUILLOU A., TRUONG D., HERMIER Y., BRUNEAU M. et BRUNEAU A.-M., « Méthode acoustique pour la détermination de la constante de Boltzmann », Revue française de métrologie, 16, 2008, 37-47.

HEYER D., NOATSCH U., TEGELER E., ANAGNOSTOU M., TURZO-ANDRAS E., ANTONSEN I., AUGEVICIUS V., BOJKOVSKI E., BRONNUM A., CHIMENTI V., DURIS S., FILIPE E., GAITA S., GRAY J., HEAD D., GRUDNIEWICZ E., IVARSSON J., KALEMCI M., KERKHOF O., LOBO I., NEMETH S., POKHODUN A., RANOSTAJ J., RENAOT E., ROSENKRANZ P., SMID M., STEUR S., STEINER A., VALIN M.H., VELIKI T. et WECKSTRÖM T, “Final report on Euromet.T-K4 (Euromet Project 820): Comparison of the realizations of the ITS-90 at the freezing points of Al (660.323 °C) and Ag (961.78 °C)”, Metrologia, 45, Techn. Suppl., 2008, 03003.

JOLY J., RIDOUX P., HAMEURY J., LIEVRE M. et FILTZ J.-R., “Development of a multiband near-to-far infrared radiance comparator (MIRCO)”, Int. J. Thermophys., 29, 3, 2008, 1094-1106, en ligne en avril 2008.

LE SANT V., MORICE R. ET FAILLEAU G., “Modeling of transient heat transfer in temperature fixed-points: indium cell design”, Int. J. Thermophys., 29, 5, 2008, 1772-1784, en ligne en juin 2008.

MATVEYEV M.S., SADLI M., SILD YU A., POKHODUN A.I. et BOURSON F., “Experience of construction and study of Pt-C eutectic in VNIIM and cooperation with LNE-INM”, Int. J. Thermophys., 30, 2009, 47-58, en ligne en avril 2008.

MORICE R., BONNIER G., BARBARAS J.-CH., FLEURENCE N., LE SANT V., RIDOUX P. et FILTZ J.-R., “Realization of the Indium fixed-point by an adiabatic technique”, Int. J. Thermophys., 29, 5, 2008, 1785-1795, en ligne en juin 2008.

MORICE R., EDLER F., PEARCE J., MACHIN G., FISCHER J. et FILTZ J.-R., “High-temperature fixed-point facilities for improved thermocouple calibration – Euramet projet 857”, Int. J. Thermophys., 29, 1, 2008, 231-240, en ligne en janvier 2008.

MORICE R., RIDOUX P. et FILTZ J.-R., Improved meausurements in contact thermometry at high temperature through practical fixed points, Measure, NCSLI, 3,1, 2008, 44-49.

MORICE R., OGURA H., FAVREAU J.-O., DEUZE T. et RIDOUX P., “Metal-carbon eutectic cells for Platinum/Palladium thermocouple calibrations”, Acta metrologica sinica, 29, 4A, 2008.

PAVESE F., FELLMUTH B., HILL K.D., HEAD D., HERMIER Y., LIPINSKI L., NAKANO T., PERUZZI A., SAKURAI H., SZMYRKA-GRZEBYK A., STEELE A.G., STEUR P.P.M., TAMURA O., TEW W.L., VALKIERS S. et WOLBER L., Progress towards the determination of the relationship of triple-point temperature versus isotopic composition of Neon, Int. J. Thermophys., 29, 1, 2008, 57-66, en ligne en janvier 2008.

PERUZZI A., VAN DER VEEN A., DEL CAMPO MALDONADO D., STEUR P.P.M., RENAOT E., BOJKOVSKI J., DOBRE M., RANOSTAJ J., FILIPE E., KARTAL DOGAN A.et POKHODUN A., “Linking the Results of Euromet.T-K7 AND CCT-K7 Key Comparisons”, Acta metrologia sinica, 29, 4A, 2008.

PITRE L., GUIANVARC’H C., SPARASCI F., RICHARD A. et TRUONG D., “Progress towards an acoustic/microwave determination of the Boltzmann constant at LNE-INM/CNAM”, Int.J. Thermophys., 29, 5, 2008, 1730-1739, en ligne en juillet 2008.

RAUTA C., RENAOT E., VALIN M.H., ELGOURDOU M., ADUNKA F., VAN DER LINDEN A., STEINER V., BARTU J., SMID M., SINDELAR M., TEGELER E., NOATSCH U., HOLTOUG J.-U., CHIMENTI V, ANAGNOSTOU M, WECKSTRØM T., SUTTON G., RUSBY R, PAVESE F., STEUR P.M., MARCARINO P., DE GROOT J., FILIPE E., LOBO I., IVARSSON J., DURIS S., BOJKOVSKI J., HITI MIHA., UGUR S., DOGAN A.K. et GRUDNIEWICZ E.,“Final report of Euromet.T-S2 (projects Euromet 391 and 712): Supplementary comparison of realizations of the indium freezing point”, Metrologia, 45, Techn. Suppl., 2008, 03001.

RENAOT E., “Pollution of aluminum ingot during the melting-freezing transitions”, BIPM, rapport CCT/08-10.

RENAOT E., “Evidence of furnace-related aluminium cell contamination”, Acta metrologia sinica, 29, 4A, 2008.

RENAOT E., HERMIER Y., VALIN M.H., BONNIER G., ADUNKA F., VAN DER LINDEN A., DOBRE M., SMID M., BRONNUM A., WECKSTROM T., TEGELER E., NOATSCH U., ANAGNOSTOU M., TURZO-ANDRAS E., NEMETH S., WHITE M., MARCARINO P., STEUR P., PAUZHA A., AUGEVICIUS V., DE GROOT M., NIELSEN J., HELGESEN F., ROSZKOWSKI W., GRUDNIEWICZ E., KUNA R., FILIPE E., LOBO I., GAITA S., CHIMENTI V., IVARSSON J., DURIS S., RANOSTAJ J., BOJKOVSKI J., STEINER A., UGUR S., GRAY J., BRUCE S., RUSBY R. et HEAD D., “Intercomparison of the realizations of the ITS-90 from 83.8058K to 692.677K among European NMIs”, Int. J. Thermophys., 29, 3, 2008, 991-1000, en ligne en avril 2008.

RENAOT E., VALIN M.H. et ELGOURDOU M., “Analysis of the comparison of TPW realizations in Europe in light of CCT Recommendation 2 (CI-2005)”, Int. J. Thermophys., 29, 3, 2008, 791-798, en ligne en février 2008.

RENAOT E., VALIN M.H. et ELGOURDOU M. ,“Influence of Impurities and filling protocol on the aluminum fixed point”, Int. J. Thermophys., 29, 3, 2008, 852-860, en ligne en février 2008.

SADLI M., ANHALT K., BOURSON F., SCHILLER S. et HARTMANN J., “Thermal effects in HTBB-3200pg furnace on metal-carbon eutectic point implementation”, Int. J. Thermophys., 30, 2009, 69-76, en ligne en juillet 2008.

SADLI M., PEHLIVAN O., BOURSON F., DIRIL A. et OZCAN K., “Collaboration between UME and LNE-INM on Co-C eutectic fixed point construction and characterization”, Int. J. Thermophys., 30, 2009, 36-46, en ligne en juillet 2008.

SAUNDERS P., FISCHER J., SADLI M., BATTUELLO M., PARK C.W., ZUNDONG Y., YOON H., LI W., VAN DER HAM E., SAKUMA F., ISHII J., BALLICO M., MACHIN G., FOX N., HOLLANDT J., MATVEYEV M., BLOEMBERGEN P. et UGUR S., “Uncertainty budgets for calibration of radiation thermometers below the silver point”, Int. J. Thermophys., 29, 3, 2008, 1066-1083.

SPARASCI F., PITRE L. et HERMIER Y., “Realization of the triple point of water in metallic sealed cells at the LNE-INM/CNAM: A Progress Report”, Int.J. Thermophys., 29, 3, 2008, 825-835.

SPARASCI F., PITRE L., ROUILLE G., THERMEAU J.-P. , HERMIER Y., TRUONG D. et GALET F., “Realization of the ITS-90 between 13 K and 84 K at LNE‑INM/CNAM: a new adiabatic calorimeter based on a closed-cycle refrigerator”, Acta metrologica sinica, 29, 4A, 2008.

WHITE D.R., BALLICO M., CHIMENTI V., DURIS S., FILIPE E., IVANOVA A., KARTAL DOGAN A., MENDEZ-LANGO E., MEYER C., PAVESE F., PERUZZI A., RENAOT E., RUDTSCH S. et YAMAZAWA K., “Uncertainties in the realization of the SPRT Sub-ranges of the ITS-90”, BIPM, rapport CCT/08-19, WG3 on Uncertainties in Contact thermometry, 2008.

WHITE D.R., BALLICO M., CHIMENTI V., DURIS S., FILIPE E., IVANOVA A., KARTAL DOGAN A., MENDEZ-LANGO E., MEYER C., PAVESE F., PERUZZI A., RENAOT E., RUDTSCH S. et YAMAZAWA K., “Working group 3 report to CCT: May 2008”, BIPM, CCT/08-18-10, 2008.

Communications

PITRE L., « Vers une redéfinition du kelvin : nouvelle détermination de la constante de Boltzmann par mesures de fréquences de résonances acoustiques », Séminaire de Master sur « Boltzmann », Le mans, France, 30 janvier 2008.

HOLLANDT J., STRUSS O., BEYNON G., BOSMA R., GAERTNER R., GIRARD F., MATVEYEV M.S., MC EVOY H.C., PEACOCK G.R., SADLI M., SAKUMA F., YOON H.W. et YUAN Z., “IEC 629421 TS: First international technical specification on the technical data for radiation thermometers”, Thermosense XXX, actes : SPIE 6939, Orlando, Etats-Unis d’Amérique, 18-20 mars 2008.

DJERROUD K., DAUSSY C., LOPEZ O., AMY-KLEIN A., BRIAUDEAU S., HERMIER Y., BORDÉ CH.J. et CHARDONNET C., “Optical measurement of the Boltzmann constant at the 10-5 level”, 3rd International Workshop on Progress in Determining the Boltzmann Constant, LNE-INM/CNAM, La Plaine Saint-Denis, France, 7 avril 2008.

GUIANVARC’H C., PITRE L., GUILLOU A., BRUNEAU M. et BRUNEAU A.-M., “Unified analytical model for the acoustic field in a spherical or quasispherical cavity: effect of modal coupling due to small perturbations”, 3rd International Workshop on Progress in Determining the Boltzmann Constant, LNE-INM/CNAM, La Plaine Saint-Denis, France, 7 avril 2008.

GUIANVARC’H C., PITRE L., GUILLOU A., SPARASCI F. et TRUONG D., “Relative calibration and characterisation of condenser microphones:influence of environmental conditions”, 3rd International Workshop on Progress in Determining the Boltzmann Constant, LNE-INM/CNAM, La Plaine Saint-Denis, France, 7 avril 2008.

HIMBERT M.E., “Foreword: SI units and fundamental constants”, 3rd International Workshop on Progress in Determining the Boltzmann Constant, LNE-INM/CNAM, La Plaine Saint-Denis, France, 7 avril 2008.

PITRE L., GUIANVARC’H C., GUILLOU A., SPARASCI F. et TRUONG D. “Progress towards an acoustic/microwave determination of the Boltzmann constant at LNE-INM/CNAM”, 3rd International Workshop on Progress in Determining the Boltzmann Constant, LNE-INM/CNAM, La Plaine Saint-Denis, France, 7 avril 2008.

PITRE L., GUIANVARC’H C., GUILLOU A., SPARASCI F. et TRUONG D., “Repeatability in the two isotherms at the TWP”, 3rd International Workshop on Progress in Determining the Boltzmann Constant, LNE-INM/CNAM, La Plaine Saint-Denis, France, 7 avril 2008.

SPARASCI F., PITRE L. et HERMIER Y., “Metallic cell for water triple point – Part 2, 15 months later”, 3rd International Workshop on Progress in Determining the Boltzmann Constant, LNE-INM/CNAM, La Plaine Saint-Denis, France, 7 avril 2008.

TRUONG D., PITRE L., GUIANVARC’H C., GUILLOU A. et SPARASCI F., “2008 INM Spheres - Lessons learned from recent mistakes”, 3rd International Workshop on Progress in Determining the Boltzmann Constant, LNE-INM/CNAM, La Plaine Saint-Denis, France, 7 avril 2008.

PITRE L., « Vers une redéfinition du kelvin : nouvelle détermination de la constante de Boltzmann», Séminaire, LNE, Trappes, France, 22 avril 2008.

HERMIER Y., « Prochaine modification de la définition du kelvin: Quelles conséquences pour les utilisateurs ? », 2e Conférence internationale de métrologie - CAFMET 2008, Tunis, Tunisie, 22-24 avril 2008.

RENAOT E., « Organiser une comparaison régionale un exemple : la comparaison des réalisations en Europe de l'EIT-90 entre 83,5058K et 419,527°C », 2e Conférence internationale de métrologie - CAFMET 2008, Tunis, Tunisie, 22-24 avril 2008.

SADLI M., ROUGIE B., BOURSON F. et BRIAUDEAU S., « Références et moyens de transfert en pyrométrie : état de l’art et nouvelles perspectives », 2e Conférence internationale de métrologie - CAFMET 2008, Tunis, Tunisie, 22-24 avril 2008.

GEORGIN E., ELGOURDOU M. et MERLONE A.: “Thermal results with gas controlled heat pipe”, 5th European Thermal-Sciences Conference, Eindhoven, Pays-Bas, 18-22 mai 2008.

MERLONE A., GEORGIN E. et ELGOURDOU M., “Use of gas controlled heat pipes in metrology”, 5th European Thermal-Sciences Conference, Eindhoven, Pays-Bas, 18-22 mai 2008.

FAILLEAU G., LE SANT V., MORICE R. et RIDOUX P., “Thermal numerical modeling for improvement of an Indium fixed-point cell design adapted to an adiabatic technique”, Euromet 732 Workshop: Towards more accurate fixed-points, NPL, Teddington, Royaume-Uni, 3-4 juin 2008.

HERMIER Y. et DEL CAMPO D., “The Mercury point: toward an adiabatic calorimeter to test the isotopic effect”, Euromet 732 Workshop: Towards more accurate fixed-points, NPL, Teddington, Royaume-Uni, 3-4 juin 2008.

HERMIER Y. et DOBRE M., “First steps towards a better Argon cryostat”, Euromet 732 Workshop: Towards more accurate fixed-points, NPL, Teddington, Royaume-Uni, 3-4 juin 2008.

RENAOT E., “Aluminium cell contamination and impurities diffusion”, Euromet 732 Workshop: Towards more accurate fixed-points, NPL, Teddington, Royaume-Uni, 3-4 juin 2008.

PITRE L., “The determinations of the Boltzmann constant”, (conférence invitée), CPEM 08, Broomfield-Colorado, Etats-Unis d’Amérique, 8-13 juin 2008.

HERMIER Y., « Mettre en place les références nationales de température », Les déjeuners de la technologie, CNAM, Paris, France, 12 juin 2008.

SPARASCI F., PITRE L., ROUILLE G., THERMEAU J-P., HERMIER Y., GALET F. et TRUONG D., “An adiabatic calorimeter based on a closed-cycle refrigerator for high-accuracy thermometer calibrations between 13 K and 84 K”, International Cryogenic Engineering Conference 22 and International Cryogenic Materials Conference 2008, Séoul, Corée, 21-25 juillet 2008.

OGURA H., DEUZE T., MORICE R., RIDOUX P. et FILTZ J.-R., “Construction of a Cr3C2-C peritectic point cell for thermocouple calibration”, SICE Annual Conference 2008, Tokyo, Japon, 20-22 août 2008.

SADLI M., “Current research on high temperatures at LNE-INM/CNAM”, Workshop on High-Temperature Fixed-Points (HTFP 2008), Daejeon, Corée, 16-17 octobre 2008.

SADLI M.,“Stability and robustness tests on Co-C, Pt-C and Re-C”, Workshop on High-Temperature Fixed-Points (HTFP 2008), Daejeon, Corée, 16-17 octobre 2008.

WOOLIAMS E., YOON H.W., ANHALT K. et SADLI M., “Preparation for Work Package 4 of the CCT-WG5 Research Plan and discussion on the topic of uncertainties in absolute radiometry”, Workshop on High-Temperature Fixed-Point (HTFP 2008), Daejeon, Corée, 16-17 octobre 2008.

BOURSON F., BRIAUDEAU S., ROUGIÉ B. et SADLI M., “Developments around the Co-C eutectic point at LNE-INM/Cnam”, Tempbeijing 2008, Pékin, Chine, 20-23 octobre 2008.

DOBRE M. et HERMIER Y., “New cryostat for long stem thermometer calibration in Argon triple point”, Tempjeiging 2008, Pékin, Chine, 20-23 octobre 2008.

SADLI M., YAMADA Y., WANG T, YOON H.W., BLOEMBERGEN P. et MACHIN G., “Stability and robustness tests on Co-C, Pt-C and Re-C cells: the first results”, Tempbeijing 2008, Pékin, Chine, 20-23 octobre 2008.

SPARASCI F., PITRE L., ROUILLE G., THERMEAU J.-P., HERMIER Y., TRUONG D. et GALET F., “Realization of the ITS‑90 between 13 K and 84 K at LNE-INM/CNAM: a new adiabatic calorimeter based on a closed-cycle refrigerator”, Tempbeijing 2008, Pékin, Chine, 20-23 octobre 2008.

BRIAUDEAU S., “Evaluation of Doppler broadening technique at LNE-INM/CNAM”, Workshop TP1-JRP5 WP4, DFM, Copenhagen, Danemark, 26 novembre 2008.

SADLI M., « Vers une nouvelle mise en pratique du kelvin à haute température », Séminaire Recherche Masters II Physique et Nanosciences, CNAM, Saint-Denis, France, 10 décembre 2008.

Publications

BORDE CH.J. et HIMBERT M.E., “Foreword: Progress in the experimental determination of Boltzmann’s constant”, C.R. Académie des sciences ; Physique, 10, 9, 2009, 813-814.

DJERROUD K., LEMARCHAND C., GAUGUET A., DAUSSY CH., BRIAUDEAU S., DARQUIE B., LOPEZ O., AMY-KLEIN A., CHARDONNET CH. et BORDE CH.J., “Measurement of the Boltzmann constant by the Doppler broadening technique at a 3.8×10−5 accuracy level”, C.R. Académie des sciences ; Physique, 10, 9, 2009, 883-893.

GUIANVARC’H C., GAVIOSO R.M., BENEDETTO G., PITRE L. et BRUNEAU M. ,“Characterization of condenser microphones under different environmental conditions for accurate speed of sound measurements with acoustic resonators”, Rev. Sci. Instrum., 80, 2009, 074901.

GUIANVARC'H C., PITRE L., BRUNEAU M. et BRUNEAU A.-M., “Acoustic field in a quasi-spherical resonator: unified perturbation model”, J. Acoust. Soc. Am., 125, 2009, 1416-1425.

HERMIER Y., « Conception et réalisation de calorimètres pour le spoints fixes de température de l’argon et du mercure », Revue française de métrologie, 20, 2009, 33-38.

HERNANDEZ D., SANS J.-L., NETCHAIEFF A., RIDOUX P. et LE SANT V., Experimental validation of a pyroreflectometric method to determine the true temperature on opaque surface without hampering reflections, Measurement, 42, 6, 2009, 836-843.

PERUZZI A., BOSMA R., KERKHOF O., PETER R., DEL CAMPO MALDONADO M.D., SMID M., ZVIZDIC D., NIELSEN M.B., ANAGNOSTOU M., GRUDNEWICZ E., NEDEA M., STEUR P.P.M., FILIPE E., LOBO I., ANTONSEN I., RENAOT E., WECKSTROM T., BOJKOVSKI J., TURZO-ANDRAS E., WHITE M., TEGELER E., DOBRE M., RANOSTAJ J., KARTAL DOGAN A., AUGEVICIUS V., POKHUDUN A. et SIMIC S., “Final report on Euromet.T-K7: Key comparison of water triple point cells”, Metrologia, 46, Tech. Suppl., 2009, 03001, DOI : 10.1088/0026-1394/46/1A/03001.

PITRE L., GUIANVARC'H C., SPARASCI F., GUILLOU A., TRUONG D., HERMIER Y. et HIMBERT M.E., “An improved acoustic method for the determination of the Boltzmann constant at LNE-INM/CNAM”, C.R. Académie des sciences ; Physique, 10, 9, 2009, 835-848.

RIDES M., MORIKAWA J., HALLDAHL L., HAY B., LOBO H., DAWSON A. et ALLEN C., Intercomparison of thermal conductivity and thermal diffusivity methods for plastics”, Polymer Testing, 28, 2009, 480-489.

Communications

LAURIE M., FÜTTERER M.A., LAPETITE J.M., FOURREZ S. et MORICE R., “New temperature monitoring devices for high-temperature irradiation experiments in the high flux reactor Petten”, International conference on advancements in nuclear instrumentation, measurement methods and their applications (ANIMMA), Marseille, France, 7-10 juin 2009.

DIDI ALAOUI I., JOUIN D et HERMIER Y., « Modèle d'extra-polation en dessous de 83 K pour les thermomètres étalons : la problématique », 14e Congrès international de métrologie, Paris, France, 22-25 juin 2009.

PETIT M., THIBERT E., VEAU J., FAVREAU J.-O., MORICE R. et PINQUIER J.-M.., « Développements de systèmes innovants de mesure de température par contact pour des environnements industriels fortement contraints », 14e Congrès international de métrologie, Paris, France, 22-25 juin 2009.

PITRE L., “An acoustic/microwave determination of the Boltzmann constant at lne-inm/cnam”, 17th Symposium on thermophysical properties, Boulder, Etats-Unis d’Amérique, 21-26 juin 2009.

RENAOT E. et VALIN M.H., « Impact de la clarification de la définition du kelvin sur la référence nationale française au point triple de l’eau », 14e Congrès international de métrologie, Paris, France, 22-25 juin 2009.

SADLI M., MORICE R., BOURSON F., FAVREAU J.O., ROUGIE B., DEUZE T. et BRIAUDEAU S., « Hautes températures : nouveaux points fixes pour une amélioration significative de l’exactitude », 14e Congrès international de métrologie, Paris, France, 22-25 juin 2009.

FILTZ J.-R., MORICE R., RIDOUX P., DEUZE T. et OGURA H., “Construction of a Cr3C2-C peritectic point cell for thermocouple calibration”, ICCAS-SICE, ICROS-SICE Int. joint conference, Fukuoka, Japon, 18-21 août 2009.

DAUSSY CH. et BRIAUDEAU S., “Spectroscopic method toward the determination of the Boltzmann constant”, 4th Int. workshop on the Boltzmann constant, Turin, Italie, 22-24 septembre 2009.

GUILLOU A., “The improvements made in our last apparatus for the Boltzmann's constant redetermination with an acoustic method.”, 4th Int. workshop on the Boltzmann constant, Turin, Italie, 22-24 septembre 2009.

PITRE L., “An acoustic/microwave determination of the Boltzmann constant at LNE-INM/CNAM”, 4th Int. workshop on the Boltzmann constant, Turin, Italie, 22-24 septembre 2009.

TRUONG D., “Measuring shell resonances”, 4th Int. workshop on the Boltzmann constant, Turin, Italie, 22-24 septembre 2009.

DIDI-ALAOUI I. et HERMIER Y., “The mercury triple point system: the thermal behavior, Euramet 732 workshop: towards more accurate fixed-points, Madrid, Espagne, 14-15 octobre 2009.

DOBRE M., HERMIER Y. et DIDI-ALAOUI I., “Automatic pressure regulation, a step to improved realization of Argon triple point, Euramet 732 workshop: towards more accurate fixed-points, Madrid, Espagne, 14-15 octobre 2009.

MORICE R., FAILLEAU G., FLEURENCE N. et RENAOT E., Assessment of the indium fixed-point in quasi-adiabatic conditions, Euramet 732 workshop: towards more accurate fixed-points, Madrid, Espagne, 14-15 octobre 2009.

RENAOT E. et MARTIN C., “Impact of the time spent in the liquid phase on the liquid-solid transition, Euramet 732 workshop: towards more accurate fixed-points, Madrid, Espagne, 14-15 octobre 2009.

Publications

BALDIT E., BENCHEIKH K., MONNIER P., BRIAUDEAU S., LEVENSON J.A., CROZATIER V., LORGERÉ I., BRETENAKER F. et LE GOUËT J.L., “Identification of Λ-like systems in Er3+:Y2SiO5 and observation of electromagnetically induced transparency”, Physical Review B, 81, 2010, 144303, DOI: 10.1103/PhysRevB.81.144303.

BENCHEIKH K., BALDIT E., BRIAUDEAU S., MONNIER P., LEVENSON J.A. et MÉLIN G., “Slow light propagation in a ring erbium-doped fiber”, Optics Express, 18, 25, 2010, DOI: 10.1364/OE.18.025642.

DE PODESTA M., MAY E.F., MEHL J.B., PITRE L., GAVIOSO R.M., BENEDETTO G., GIULIANO ALBO P.A., TRUONG D. et FLACK D., “Characterization of the volume and shape of quasi-spherical resonators using coordinate measurement machines”, Metrologia, 47, 5, 2010, 588-604, DOI: 10.1088/0026-1394/47/5/010.

EDLER F., MORICE R., OGURA H. et PEARCE J., “Investigation of Co-C cells to improve thermocouple calibration”, Metrologia, 47, 1, 2010, 90-95, DOI: 10.1088/0026-1394/47/1/010.

EL GOURDOU M. et RENAOT E., « L’amplificateur de température », Revue française de métrologie, 21, 2010, 23-31.

FAILLEAU G., FLEURENCE N., MORICE R., GAVIOT E. et RENAOT E., “Adiabatic calorimetry approach to assess thermal influences on the indium melting point”, Int. J. Thermophys., 31, 8-9, 2010, 1608-1621, DOI: 10.1007/s10765-010-0810-0.

FAILLEAU G., GAVIOT E., CAMBERLEIN L., FLEURENCE N., POLET F., BECHE B. et MORICE R., “Heat flow metric policy for dynamic monitoring of fixed-point cells”, J. of Physics, Conference series 238, 2010, 012012, DOI: 10.1088/1742-6596/238/1/012012.

GAVIOSO R.M., MADONNA RIPA D., GUIANVARC’H C., BENEDETTO G., GIULIANO ALBO P.A., CUCCARO R., PITRE L. et TRUONG D., “Shell perturbations of an acoustic thermometer determined from speed of sound in gas mixtures”, Int. J. Thermophys., 31, 8-9, 2010, 1739-1748, DOI: 10.1007/s10765-010-0831-8.

GAVIOT E., FAILLEAU G., MORICE R., CAMBERLEIN L., POLET F. et BECHE B., “Metrological prospects for the assessment of transition plateaus”, Metrologia, 47, 4, 2010, 349-356, DOI: 10.1088/0026-1394/47/4/001.

GAVIOT E., FAILLEAU G., MORICE R., CAMBERLEIN L., POLET F. et BECHE B., “Towards a thermodynamic assessment of transition plateaus”, Metrologia, 47, 4, 2010, 357-362, DOI: 10.1088/0026-1394/47/4/002.

HERMIER Y., DIDIALAOUI I. et JOUIN D., “About the extrapolation at 77K for SPRTs calibrated in the 83K-273K temperature range”, document CCT/10-10, www.bipm.org.

LAURIE M., MAGALLON D., REMPE J., WILKINS C., PIERRE J., MARQUIE C., EYMERY S. et MORICE R., “Ultrasonic high temperature sensors: past experiments and prospects for future use”, Int. J. Thermophys., 31, 8, 2010, 1417-1427, DOI: 10.1007/s10765-010-0791-z.

LEMARCHAND C., DJERROUD K., DARQUIÉ B., LOPEZ O., AMY-KLEIN A., CHARDONNET CH., BORDÉ CH.J., BRIAUDEAU S. et DAUSSY CH., “Determination of the Boltzmann constant by laser spectroscopy as a basis for future measurements of the thermodynamic temperature”, Int. J. Thermophysics, 31, 7, 2010, 1347-1359, DOI: 10.1007/s10765-010-0755-3.

MACHIN G., ANHALT K., BLOEMBERGEN P., HARTMANN J., SADLI M., SAUNDERS P., WOOLLIAMS E., YAMADA Y. et YOON H., “Realisation and dissemination of thermodynamic temperature above the silver point (1234.93 K)”, CCT/10-12/rev1, “MeP-K direct methods”, CCT/10-13, “MeP-K indirect methods”, CCT/10-14, documents du CCT accessibles sur le site www.bipm.org.

MACHIN G., BLOEMBERGEN P., ANHALT K., HARTMANN J., SADLI M., SAUNDERS P., WOOLLIAMS E., YAMADA Y. et YOON H., “Practical implementation of the Mise en pratique for the definition of the kelvin above the silver point”, Int. J. Thermophysics, 31, 8-9, 2010, 1779-1788.

OGURA H., DEUZE T., RIDOUX P., MORICE R. et FILTZ J-R., “Construction of a Cr3C2-C peritectic point cell for thermocouple calibration”, SICE Journal of control, measurement, and system integration; 3, 2, 2010, 081-085.

PAVESE F., FAHR M., HERMIER Y., HILL K.D., LIPINSKI L., NAKANO T., PERUZZI A., SAKURAI H., SPARASCI F., STEUR P.P.M., SZMYRKA-GRZEBYK A., TAMURA O., TEW W.L., VALKIERS S. et VAN GEEL J., “Further progress toward the determination of Ttp−x(22Ne)”, Int. J. of Thermophysics, 31, 8-9, 2010, 1633-1643, DOI: 10.1007/s10765-010-0817-6.

SUTTON G, UNDERWOOD R, PITRE L, DE PODESTA M et VALKIERS S, “Acoustic resonator experiments at the triple point of water: first results for the Boltzmann constant and remaining challenges”, Int. J. Thermophys, 31, 7, 2010, 1310-1346, DOI: 10.1007/s10765-010-0722-z.

TRUONG D., SPARASCI F., FOLTÊTE E., OUISSE M. et PITRE L., “Measuring shell resonances of spherical acoustic resonators”, International Journal of Thermophysics, en ligne le 16 déc. 2010, DOI: 10.1007/s10765-010-0846-1.

UNDERWOOD R., MEHL J.B, PITRE L, EDWARDS G.J., SUTTON G. et DE PODESTA M., “Waveguide effects on quasispherical microwave cavity resonators”, Meas. Sci. Technol., 21, 7, 2010, 075103, DOI: 10.1088/0957-0233/21/7/075103.

WHITE D.R., BALLICO M., DEL CAMPO D., DURIS S., FILIPE E., IVANOVA A., KARTAL DOGAN A., MENDEZ LANGO E., MEYER C., PAVESE F., PERUZZI A., RENAOT E. RUDTSCH S., WANG T. et YAMAZAWA K., “Uncertainties in the SPRT Sub-ranges of ITS-90: Topics for Further research”, Int. J. Thermophys, 31, 8-9, 2010, 1749-1761, DOI: 10.1007/s10765-010-0832-7.

Communications

RENAOT E., « Fiabilité à long terme des cellules thermométriques matérialisant les points de définition de l’EIT-90 entre 29, 76 °C et 660,323 °C », 3e Conférence internationale de métrologie (CAFMET 2010), Le Caire, Egypte, 18-23 avril 2010.

SADLI M., MORICE R., BOURSON F., BRIAUDEAU S., DEUZE T., FAILLEAU G., FAVREAU J., FLEURENCE N. et ROUGIE B., « Nouvelles références à haute température à base d'alliages eutectiques métal-carbone », Congrès de la Société française de thermique, Le Touquet, France, 25-28 mai 2010.

BATTUELLO M., FLORIO M., SADLI M. et BOURSON F., “Study of two CO-C fixed-point cells prepared at inrim and LNE-CNAM”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

BOURSON F., SADLI M., ROUGIÉ B. et BRIAUDEAU S., “Investigation of its-90 silver and copper point blackbodies”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

BRIAUDEAU S., SADLI M., BOURSON F. et ROUGIÉ B., “Primary radiometry for the mise–en-pratique: the laser-based radiance method applied to a pyrometer”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

FAILLEAU G., FLEURENCE N., MORICE R., GAVIOT E. et RENAOT E., “Thermal assessment and realization of the indium melting point by using an adiabatic calorimetry technique”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

LAURIE M., MORICE R., MAGALLON D., PIERRE J., MARQUIE C. et EYMERY S., “Ultrasonic high temperature sensors: past experiments and prospectives for future use”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

MACHIN G., BLOEMBERGEN P., ANHALT K., HARTMANN J., SADLI M., SAUNDERS P., WOOLLIAMS E., YAMADA Y. et YOON H., “Mise-en-pratique for the definition of the kelvin above Ag point”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

OGURA H., FAVREAU J.-O., DEUZÉ T. et MORICE R.,“Comparison of Co-C and Pd-C eutectic point cells for thermocouple calibration between LNE and NMIJ”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

PITRE L., SPARASCI F., GUILLOU A. et TRUONG D., “Acoustic determination of the Boltzmann constant: progress with a diamond turned quasi spherical resonator”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

PITRE L., SPARASCI F. et TRUONG D., “Acoustic thermometry: preliminary results from 84 K to 273 K at LNE-CNAM”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

PUSNIK I., CLAUSEN S., FAVREAU J-O., GUTSCHWAGER B., KARTALDOGAN A., DIRIL A., PEHLIVAN O., MCEVOY H., SAMSET H., STEINER A. et VAN DER HAM E., “Comparison of blackbodies for calibration of infrared ear thermometers”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

SADLI M., BOURSON F., ROUGIÉ B. et BRIAUDEAU S., “Construction and evaluation of a set of Co-C and Re-C eutectic cells”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

SADLI M., KHLEVNOY B., WANG T., YAMADA Y. et MACHIN G., “Long-term stability of metal-carbon eutectic cells”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

SADLI M., MATVEYEV M., BOURSON F., FUKSOV V., SILD Y.A. et POKHODUN A.I., “Co-C and Re-C eutectic point cells comparison between LNE-INM and VNIIM”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

SPARASCI F., PITRE L., ROUILLE G., THERMEAU J.-P., TRUONG D., GALET F. et HERMIER Y., “An adiabatic calorimeter for the realization of the ITS-90 in the cryogenic range at the LNE-CNAM”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

SPARASCI F., PITRE L. et TRUONG D., “Metrological charac-terization of capsule-type standard platinum resistance thermometers at the triple point of water for the Boltzmann project”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

SPARASCI F., PITRE L., TRUONG D., RISEGARI L. et HERMIER Y., “Realization of a 3He – 4He vapor-pressure thermometer for temperatures between 0.65 K and 5 K at LNE-CNAM”, Tempmeko & ISHM 2010, Portorož, Slovénie, 31 mai - 4 juin 2010.

FAILLEAU G., FLEURENCE N., DEUZE T., SADLI M., BRIAUDEAU S., FAVREAU J.-O. et MORICE R., « Points eutectiques métal-carbone appliqués à la thermométrie de contact au-dessus de 1 100 °C », Journée thématique de la SFT « Mesure des hautes températures par capteurs intrusifs », CNAM, Saint-Denis, France, 29 juin 2010.

FLEURENCE N., FAILLEAU G., DEUZE T., SADLI M., BRIAUDEAU S., FAVREAU J.-O. et MORICE R., « Stabilité physico-chimique des thermocouples à haute temperature », Journée thématique de la SFT « Mesure des hautes températures par capteurs intrusifs », CNAM, Saint-Denis, France, 29 juin 2010.

LAURIE M., MAGALLON D., REMPE J., WILKINS S., PIERRE J., MARQUIE C., EYMERY S. et MORICE R., « Thermométrie à ultrasons : historique et perspectives d'avenir », Journée thématique de la SFT « Mesure des hautes températures par capteurs intrusifs », CNAM, Saint-Denis, France, 29 juin 2010.

PITRE L., SPARASCI F., GUILLOU A., TRUONG D., HERMIER Y. et HIMBERT M.E., “New determination of the Boltzmann constant with an acoustic method at LNE”, Conference on Precision Electromagnetic Measurements (CPEM 2010), Daejon, Corée du Sud, 13-18 juin 2010.

HIMBERT M. et al., “The Boltzmann constant”, Conférence invitée au Nat. Metr. Institute UME, Tübitak, Turquie, nov 2010.

Publications

BATTUELLO M., FLORIO M., SADLI M. et BOURSON F., “Investigations on two Co-C fixed-point cells prepared at INRIM and LNE-Cnam”, International Journal of Thermophysics, 32, 7-8, 2011, 1732-1743, DOI: 10.1007/s10765-011-0971-5.

BOURSON F., SADLI M., ROUGIÉ B. et BRIAUDEAU S., “Study and comparison of newly developed ITS-90 Silver- and Copper-point cells”, International Journal of Thermophysics, 32, 7-8, 2011, 1602- 1610, DOI: 10.1007/s10765-011-0974-2.

BRIAUDEAU S., SADLI M., BOURSON F., ROUGIÉ B., RIHAN A., et ZONDY J-J., “Primary radiometry for the mise-en-pratique: The laser-based radiance method applied to a pyrometer”, International Journal of Thermophysics, 32, 11-12, 2011, 2183-2196, DOI: 10.1007/s10765-011-1129-1.

OGURA H., FAVREAU J.-O., DEUZE T. et MORICE R., “Comparison of Co–C and Pd–C eutectic-point cells for thermocouple calibration between LNE-Cnam and NMIJ”, International Journal of Thermophysics, 32, 7-8, 2011, 1811-1823, DOI: 10.1007/s10765-011-1022-y.

PEARCE J., EDLER F., ELLIOTT C., FAILLEAU G., MORICE R. et OGURA H., “Investigation of Pd-C cells to improve thermocouple calibration”, Metrologia, 48, 2011, 375-381, DOI: 10.1088/0026-1394/48/5/019.

PITRE L., SPARASCI F., TRUONG D., GUILLOU A., RISEGARI L. et HIMBERT M.E., “Determination of the Boltzmann constant using a quasi-spherical acoustic resonator”, Phil. Trans. R. Soc. A, 369, 2011, 4014-4027, DOI: 10.1098/rsta.2011.0197.

PITRE L., SPARASCI F., TRUONG D., GUILLOU A., RISEGARI L. et HIMBERT M.E., “Measurement of the Boltzmann Constant kB Using a Quasi-Spherical Acoustic Resonator”, International Journal of Thermophysics, 32, 2011, 1825-1886, DOI: 10.1007/s10765-011-1023-x.

PUŠNIK I., CLAUSEN S., FAVREAU J.-O., GUTSCHWAGER B., DOĞAN A.K., DIRIL A., GUVEN O.P., MCEVOY H., HOEM S.S., STEINER A. et VAN DER HAM E., “Comparison of blackbodies for calibration of infrared ear thermometers”, International Journal of Thermophysics, 32, 1-2, 2011, 127-138, DOI: 10.1007/s10765-011-0928-8.

RIHAN A., ANDRIEUX E., ZANON-WILLETTE T., BRIAUDEAU S., HIMBERT M. et ZONDY J.-J., “A pump-resonant signal-resonant optical parametric oscillator for spectroscopic breath analysis”, Appl Phys B, 102, 2, 2011, 367-374, DOI: 10.1007/s00340-010-3996-8.

SADLI M., BLOEMBERGEN P., KHLEVNOY B., WANG T., YAMADA Y. et MACHIN G., “An international study of the long-term stability of metal–carbon eutectic cells”, International Journal of Thermophysics, 32, 7-8, 2011, 1786–1799, DOI: 10.1007/s10765-011-1009-8.

SADLI M., MATVEYEV M., BOURSON F., FUKSOV V., SILD Y.A. et POKHODUN A., “Comparison of pyrometric Co-C and Re-C eutectic-point cells between VNIIM and LNE-Cnam”, International Journal of Thermophysics, 32, 11-12, 2011, 2657-2670, DOI: 10.1007/s10765-011-1079-7.

SPARASCI F., PITRE L., ROUILLE G., THERMEAU J.-P., TRUONG D., GALET F. et HERMIER Y., “An adiabatic calorimeter for the realization of the ITS-90 in the cryogenic range at the LNE-CNAM”, International Journal of Thermophysics, 32, 2011, 201-214, DOI: 10.1007/s10765-011-0941-y.

SPARASCI F., PITRE L., TRUONG D., RISEGARI L. et HERMIER Y., “Realization of a 3He–4He vapor-pressure thermometer for temperatures between 0.65 K and 5 K at LNE-CNAM”, International Journal of Thermophysics, 32, 2011, 139-152, DOI: 10.1007/s10765-011-0929-7.

TRUONG D., SPARASCI F., FOLTETE E., OUISSE M. et PITRE L., “Measuring shell resonances of spherical acoustic resonators”, International Journal of Thermophysics, 32, 2011, 427-440, DOI: 10.1007/s10765-010-0846-1.

Communications

PITRE L., SPARASCI F., GUILLOU A., TRUONG D. et RISEGARI L., “The Boltzmann constant from the speed of sound in a non-quite spherical cavity”, The new SI: units of measurement based on fundamental constants, The Royal Society, Londres, Royaume-Uni, 24-25 janvier 2011.

SADLI M., “Current and future high temperature measurements challenges for the nuclear industry, in high temperature”, Measurement Workshop ESTEC, Noordwijk, Pays-Bas, 9 mars 2011.

SPARASCI F., PITRE L., GUILLOU A., TRUONG D. et RISEGARI L., “Towards the mise en pratique of the Boltzmann constant in thermometry at the LNE-CNAM”, NIST, 28 mars 2011.

SADLI M., BRIAUDEAU S. et HERMIER Y., “High-temperature metrology: challenges and potential solutions”, Congrès international “Materials and Fluids at High Temperature” (MFHT4), Orléans, France, 30-31 mars et 1er avril 2011.

MATVEYEV M., SADLI M., SILD Y. A., BOURSON F. et FUKSOV V., “High temperature fixed point and scale realisation comparisons between VNIIM and LNE-CNAM: report on six years of collaboration, 4th All-Russian Conference On Thermometry (Temperature 2011), Saint-Petersbourg, Russie, 19-21 avril 2011.

FAILLEAU G., DEUZE T., ELLIOTT C., PEARCE J., MACHIN G., BRIAUDEAU S. et SADLI M., “Development of an Fe-C eutectic fixed-point for the calibration and in-situ monitoring of thermocouples”, 2nd IMEKO TC 11 International Symposium Metrological Infrastructure, Cavtat, Croatie, 15-17 juin 2011.

JOHANSSON L., FILTZ J-R., DE FELICE P., SADLI M., PLOMPEN A., HAY B., DINSDALE A., POMMÉ S., CASSETTE PH. et KEIGHTLEY J., “Advanced metrology for new generation nuclear power plants”, 2nd IMEKO TC 11 International Symposium Metrological Infrastructure, Cavtat, Croatie, 15-17 juin 2011.

SADLI M., “HiTeMS/WP4 Validated methods for non-contact thermometry above 2500 °C including novel correction techniques – overview of work plan”, EMRP Kick-off meeting of the JRP-IND01, NPL, Teddington, Royaume-Uni, 13-15 septembre 2011.

SADLI M., DEL CAMPO D., DE PODESTA M., FAILLEAU G., FOURREZ S., GARCIA C., PEARCE J., RAE C. et SCERVINI M., “Improving high temperature measurements for the nuclear industry at the european level”, 15e Congrès international de métrologie, Paris, France, 3-6 octobre 2011.

SADLI M., BOURSON F., BRIAUDEAU S., DEUZE T., FAILLEAU G., AGNANDJI E., OJANEN M. et ROUGIÉ B., “Review and prospects of the high temperature metrology activities at LNE-Cnam”, 15e Congrès international de métrologie, Paris, France, 3-6 octobre 2011.

MACHIN G., ANHALT K., EDLER F., PEARCE J., SADLI M., STRNAD R. et VUELBAN E., “HITEMS: a pan-european project to solve high temperature measurement problems in industry”, 15e Congrès international de métrologie, Paris, France, 3-6 octobre 2011.

SADLI M., DEL CAMPO D., ELLIOTT C., GARCIA C., DE PODESTA M., FAILLEAU G., FOURREZ S., PEARCE J., RAE C. et SCERVINI M., “METROFISSION: High temperature metrology for the next generation nuclear power plants”, 3e Groupe de travail “Metering of feed-water flow, temperature and thermal power” organisé par SP et EDF, Chatou, France, 10-12 octobre 2011.

SPARASCI F., “MeteoMet Work Package 2: Novel methods, instruments and measurements for climate parameters”, EMRP MeteoMet kick-off meeting, Turin, Italie, 12-13 octobre 2011.

SPARASCI F., “MeteoMet Task 2.2: Novel methods and instruments for atmospheric humidity measurement”, EMRP MeteoMet kick-off meeting, Turin, Italie, 12-13 octobre 2011.

SADLI M., “High-temperature fixed points for radiation thermometry”, Euramet TC-T Workshop “Uncertainties in thermometric fixed points & SPRT calibrations”, SMD, Bruxelles, Belgique, 27-28 octobre 2011.

Publications

ELLIOTT C.J., PEARCE J.V., FAILLEAU G., DEUZÉ T., BRIAUDEAU S., SADLI M. et MACHIN G., “Fe-C eutectic fixed-point cells for contact thermometry: an investigation and comparison”, Metrologia, 49, 1, 2012, 88-94, DOI: 10.1088/0026-1394/49/1/013.

HILL K.D., SZMYRKA-GRZEBYK A., LIPIŃSKI L., HERMIER Y., PITRE L. et SPARASCI F., “CCT-K2.4: NRC/INTiBS/LNE-Cnam trilateral comparison of capsule-type standard Platinum resistance thermometers from 13.8 K to 273.16 K”, Metrologia, 49, 03005, 2012, DOI: 10.1088/0026-1394/49/1A/03005.

RENAOT E. et JOUIN D., « Étalonnage et vérification des thermomètres – Généralités et description d'instruments », Techniques de l’ingénieur, R2520v2, 2012.

RENAOT E. et JOUIN D., « Étalonnage et vérification des thermomètres – Techniques d'étalonnage », Techniques de l’ingénieur, R2521, 2012.

Communications

MACHIN G., ANHALT K., EDLER F., PEARCE J., SADLI M., STRNAD R. et VUELBAN E., “HITEMS: A project to solve high temperature measurement problems in industry”, 9th International Temperature Symposium, Anaheim, États-Unis, 1923 mars 2012.

SADLI M., FAILLEAU G., PEARCE J., DEL CAMPO D., ELLIOTT C., FOURREZ S., DE PODESTA M. et GARCIA C., “Metrofission: New high-temperature references and sensors for the nuclear industry”, 9th International Temperature Symposium, Anaheim, États-Unis, 1923 mars 2012.

MACHIN G., ANHALT K., BLOEMBERGEN P., SADLI M., YAMADA Y. et WOOLLIAMS E., “Progress report for the CCT-WG5 high temperature fixed point research plan”, 9th International Temperature Symposium, Anaheim, États-Unis, 1923 mars 2012.

YAMADA Y., ANHALT K., BATTUELLO M., BLOEMBERGEN P., KHLEVNOY B., MACHIN G., MATVEYEV M., SADLI M. et WANG T., “Construction of high-temperature-fixed-point cells for assignment of thermodynamic temperatures”, 9th International Temperature Symposium, Anaheim, États-Unis d’Amérique, 1923 mars 2012.

ANHALT K., TAUBERT R.D., MACHIN G., WOOLLIAMS E., DURY M.R., YOON H., SADLI M., BRIAUDEAU S., KHLEVNOY B., BALLICO M., JAHAN F., TODD A. et WOODS D., “A comparison of absolute radiometry by metal-Carbon eutectic fixed-points”, 9th International Temperature Symposium, Anaheim, États-Unis, 1923 mars 2012.

BOURSON F., BRIAUDEAU S., ROUGIÉ B. et SADLI M., “Determination of the furnace effect of two high-temperature furnaces on metal-Carbon eutectic points”, 9th International Temperature Symposium, Anaheim, États-Unis, 1923 mars 2012.

FAILLEAU G., DEUZÉ T., BOURSON F., BRIAUDEAU S. et SADLI M., “A new technique for direct traceability of contact thermometry Co-C eutectic cells to the ITS-90”, 9th International Temperature Symposium, Anaheim, États-Unis d’Amérique, 1923 mars 2012.

PAVESE F., FAHR M., HERMIER Y., HILL K.D., JIN SEOG KIM, LIPINSKI L., NAGAO K., NAKANO T., PERUZZI A., SPARASCI F., STEUR P.P.M., SZMYRKA-GRZEBYK A., TAMURA O., TEW W.L., VALKIERS S. et VAN GEEL J., “Dependence of the triple point temperature of Neon on isotopic composition and its implications for the ITS-90”, 9th International Temperature Symposium, Anaheim, États-Unis, 1923 mars 2012.

DIDI-ALAOUI I., VERGÉ A., FIORILLO D., JOUIN D., SPARASCI F. et HERMIER Y., “Design and implementation of a dedicated calorimeter for long-stem SPRT calibrations at Argon and Oxygen triple points”, 9th International Temperature Symposium, Anaheim, États-Unis, 1923 mars 2012.

PITRE L., SPARASCI F., TRUONG D., GUILLOU A., RISEGARI L. et GIULIANO ALBO P.A., “Determination of the Boltzmann constant using a quasi-spherical acoustic resonator in Helium gas”, 9th International Temperature Symposium, Anaheim, États-Unis d’Amérique, 1923 mars 2012.

RISEGARI L., SPARASCI F., PITRE L. et TRUONG D., “Preliminary measurements on a 3He – 4He vapor-pressure thermometer for temperatures between 0.65K and 5K”, 9th International Temperature Symposium, Anaheim, États-Unis, 1923 mars 2012.

SPARASCI F., DIDI-ALAOUI I., VERGÉ A. et HERMIER Y., “A new calorimeter for the simultaneous calibration of SPRTs and CSPRTs at the triple point of Mercury”, 9th International Temperature Symposium, Anaheim, États-Unis, 1923 mars 2012.

FISCHER J., FELLMUTH B., GAISER C., ZANDT T., PITRE L., BRIAUDEAU S., SPARASCI F., TRUONG D., HERMIER Y. et al., “The imeraplus joint research project for determinations of the Boltzmann constant”, 9th International Temperature Symposium, Anaheim, États-Unis, 1923 mars 2012.

JOUIN D., DEVAUX F., DIDI-ALAOUI I. et HERMIER Y., « Comparaisons interlaboratoires en thermométrie de contact dans les domaines –20°C / 300 °C et 800 °C / 1400°C », 4e Conférence Internationale de Métrologie - CAFMET 2012, Marrakech, Maroc, 23–27 avril 2012.

PITRE L., “Survey of Boltzmann constant measurements”, Conference on Precision Electromagnetic Measurements (CPEM-2012), Washington DC, États-Unis, 1–6 juillet 2012, DOI: 10.1109/CPEM.2012.6250633.

GUILLOU A., PITRE L., SPARASCI F., TRUONG D., RISEGARI L. et HIMBERT M.E., “Experimental characterization of a 10-6 relative amplitude flow effect on the speed of sound measurement inside an acoustic quasi-spherical resonator”, 19th International Congress on Sound and Vibration 2012 (ICSV 19), Actes de la conférence publiés par Curran Associates Inc., ISBN: 9781622764655, 2353–2360, Vilnius, Lituanie, 8–12 juillet 2012.

ROUGIÉ B., “Uncertainties in the out-of-band effect for the thermodynamic temperature measurement”, Workshop Uncertainties in Radiometric Temperature Measurements, Turin, Italie, 12 octobre 2012.

SADLI M. “Context and introduction of the workshop on uncertainties in radiometric temperature measurements”, Workshop Uncertainties in Radiometric Temperature Measurements, Turin, Italie, 12 octobre 2012.

BRIAUDEAU S., “Optical diffusion estimate in radiance measurements”, Workshop Uncertainties in Radiometric Temperature Measurements, Turin, Italie, 12 octobre 2012.

BERTRAND J., MORICE R., BEAUMONT O. et DUBOIS J.-P., “Field calibration device for Raman backscatter based fiber optic distributed temperature system (DTS) technology”, Proc. SPIE 8421, 22nd Int. Conference on Optical Fiber Sensors (OFS2012), Pékin, Chine, DOI: 10.1117/12.974942, 15–19 octobre 2012.

LAURIE M., FOURREZ S., FÜTTERER M.A., LAPETIT J.M., SADLI M., MORICE R. et FAILLEAU G., “Long term out-of-pile thermocouple tests in conditions representative for nuclear gas-cooled high temperature reactor carburizing atmospheres”, 6th International Topical Meeting on High Temperature Reactor Technology, Tokyo, Japon, 28 oct.–1er novembre 2012.

BUÉE B., VERGÉ A., VIDAL V., GEORGIN E. et SPARASCI F., “Copper passivation procedure for water-filled copper cells for applications in metrology”, Rapport du projet MeteoMet, http://arxiv.org/abs/1211.7294, novembre 2012.

Publications

AHMED M.G., ALI K., BOURSON F. et SADLI M., “Comparison of the copper blackbody fixed-point cavities between NIS and LNE-Cnam”, Meas. Sci. Technol., 24, 2013, DOI: 10.1088/0957-0233/24/9/095902.

BOURSON F., BRIAUDEAU S., ROUGIÉ B. et SADLI M., “Determination of the furnace effect of two high-temperature furnaces on metal-carbon eutectic points”, AIP Conference Proceedings, 1552, 380, 2013, DOI: 10.1063/1.4821389.

DIDI-ALAOUI I., FIORILLO D., VERGÉ A., SPARASCI F., JOUIN D. et HERMIER Y., “Design and implementation of a dedicated calorimeter for long stem SPRTs calibrations at the argon and oxygen triple points”, AIP Conference Proceedings, 1552, 474, 2013, DOI: 10.1063/1.4819587.

FAILLEAU G., DEUZÉ T., BOURSON F., BRIAUDEAU S. et SADLI M., “A new technique for direct traceability of contact thermometry Co-C eutectic cells to the ITS-90”, AIP Conference Proceedings, 1552, 352, 2013, DOI: 10.1063/1.4819565.

FISCHER J., FELLMUTH B., GAISER C., ZANDT T., PITRE L., BRIAUDEAU S., SPARASCI F., TRUONG D., HERMIER Y., GAVIOSO R.M., GUIANVARC'H C., GIULIANO P. ALBO A., MERLONE A., MORO F., DE PODESTA M., SUTTON G., UNDERWOOD R., MACHIN G., DEL CAMPO D., SEGOVIA PURAS J., VEGA-MAZA D., PETERSEN J., HALD J., NIELSEN L., VALKIERS S., DARQUIÉ B., BORDÉ CH., CHARDONNET CH., DAUSSY CH., GIANFRANI L., CASTRILLO A., LAPORTA P. et GALZERANO G., “The IMERAPlus joint research project for determinations of the Boltzmann constant”, AIP Conference Proceedings, 1552, 1, 2013, DOI: 10.1063/1.4821367.

LAURIE M., FOURREZ S., FÜTTERER M.A., LAPETITE J.M., SADLI M., MORICE R. et FAILLEAU G., “Long term out-of-pile thermocouple tests in conditions representative for nuclear gas-cooled high temperature reactors”, Nuclear Engineering and Design, 271, 2013, DOI: 10.1016/j.nucengdes.2013.11.049.

MACHIN G., ANHALT K., BLOEMBERGEN P., SADLI M., YAMADA Y. et WOOLLIAMS E.R., “Progress report for the CCT-WG5 high temperature fixed point research plan”, AIP Conference Proceedings, 1552, 317, 2013, DOI: 10.1063/1.4821384.

MACHIN G., ANHALT K., EDLER F., PEARCE J.V., SADLI M., STRNAD R. et VUELBAN E.M., “HiTeMS: A project to solve high temperature measurement problems in industry”, AIP Conference Proceedings, 1552, 958, 2013, DOI: 10.1063/1.4821414.

MCEVOY H.C., SADLI M., BOURSON F., BRIAUDEAU S. et ROUGIÉ B., “A comparison of the NPL and LNE-Cnam silver and copper fixed-point blackbody sources, and measurement of the silver/copper temperature interval”, Metrologia, 50, 6, 2013, DOI: 10.1088/0026-1394/50/6/559.

PAVESE F., P.P.M. STEUR, HERMIER Y., HILL K.D., KIM J.S., LIPISKI L., NAGAO K., NAKANO T., PERUZZI A., SPARASCI F., SZMYRKA-GRZEBYK A., TAMURA O., TEW W.L., VALKIERS S. et VAN GEEL J., “Dependence of the triple point temperature of neon on isotopic composition and its implications for the ITS-90”, AIP Conference Proceedings, 1552, 192, 2013, DOI: 10.1063/1.4821378.

SADLI M., DEL CAMPO D., DE PODESTA M., DEUZÉ T., FAILLEAU G., ELLIOTT C.J., FOURREZ S., GARCÍA C. et PEARCE J.V., “MetroFission: New high-temperature references and sensors for the nuclear industry”, AIP Conference Proceedings, 1552, 1003, 2013, DOI: 10.1063/1.4821417.

SPARASCI F., DIDIALAOUI I., VERGÉ A. et HERMIER Y., “A new calorimeter for the simultaneous calibration of SPRTs and CSPRTs at the triple point of mercury”, AIP Conference Proceedings, 1552, 486, 2013, DOI: 10.1063/1.4819589.

YAMADA Y., ANHALT K., BATTUELLO M., BLOEMBERGEN P., KHLEVNOY B., MACHIN G., MATVEYEV M., SADLI M. et WANG T., “Construction of high-temperature fixed-point cells for thermodynamic temperature assignment”, AIP Conference Proceedings, 1552, 335, 2013, DOI: 10.1063/1.4821385.

Communications

PARGA C., BOURSON F., SADLI M. et JOURNEAU C., « Cellules à points fixes de température pour la recherche appliqué », Congrès Français de Thermique, Gérardmer, France, 28–31 mai 2013, http://lc.cx/qCr.

SADLI M., DE PODESTA M., DEL CAMPO D., DEUZE T., EDWARDS G., ELLIOTT C.J., FAILLEAU G., FOURREZ S., GARCIA IZQUIERDO C., LAURIE M., MOKDAD S.A., PEARCE J.V. et SUTTON G., “New temperature references and sensors for the next generation of nuclear power plants”, ANIMMA 2013, Marseille, France, 23–27 juin 2013, DOI: 10.1109/ANIMMA.2013.6727925.

FAILLEAU G., DEUZE T., SADLI M., MOKDAD S. et BRIAUDEAU S., « Méthodes d’auto-validation pour thermocouples à haute température », 16e Congrès International de Métrologie, Paris, France, 7–10 octobre 2013, DOI: 10.1051/metrology/201315002.

FAILLEAU G. et EDLER F., “HiTeMS WP3: Self-validating contact thermometry sensors for above 2000 °C”, Workshop HiTeMS, 16e Congrès International de Métrologie, Paris, France, 7–10 octobre 2013.

LOWE D., BOURSON F., JOURNEAU C., MACHIN G., PARGA C. et SADLI M., “Correction for window transmission losses in radiation thermometry using high temperature fixed points”, 16e Congrès International de Métrologie, Paris, France, 7–10 octobre 2013, DOI: 10.1051/metrology/201315003.

MACHIN G., ANHALT K., EDLER F., PEARCE J., SADLI M., STRNAD R. et VUELBAN E., “Progress report for EMRP project ‘High Temperature Metrology for Industrial Applications’; HiTeMS”, 16e Congrès International de Métrologie, Paris, France, 7–10 octobre 2013, DOI: 10.1051/metrology/201315001.

SADLI M., BELLIN-CROYAT T., BOURSON F., DEUZÉ T., DIRIL A., FAILLEAU G., JOURNEAU C., LOWE D., MOKDAD S.A., MONTEIRO M., PARGA C. et RICHARD N., “High-temperature fixed points for in-situ industrial applications”, Workshop HiTeMS, 16e Congrès International de Métrologie, Paris, France, 7–10 octobre 2013.

SADLI M., BOURSON F., BRIAUDEAU S., COUTIN J.-M., DEUZE T., FAILLEAU G., GUIMIER S., KOSMALSKI S., KOZLOVA O., MARTIN C., MOKDAD S., RONGIONE L., ROUGIE B., SADOUNI A., TRUONG D., VIDAL V. et HERMIER Y., “Amélioration des références et dissémination dans le domaine des hautes températures et de la pyrométrie optique au LNE-Cnam”, 16e Congrès International de Métrologie, Paris, France, 7–10 octobre 2013, DOI: 10.1051/metrology/201315009.

SADLI M., BOURSON F., DIRIL A., JOURNEAU C., LOWE D. et PARGA C., “Construction and in-situ characterisation of high-temperature fixed point cells devoted to industrial applications”, 16e Congrès International de Métrologie, Paris, France, 7–10 octobre 2013.

BOURSON F., SADLI M., BRIAUDEAU S., ROUGIÉ B. et KOZLOVA O., “Influence of the opening of a blackbody cavity measured at the Ag and Cu ITS-90 fixed points”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

BRIAUDEAU S., OJANEN M., BOURSON F., SADLI M. et ROUGIÉ B., “Thermodynamic temperature of the copper fixed point: experimental validation of the uncertainty budget”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

ELLIOTT C.J., FAILLEAU G., DEUZÉ T., SADLI M., PEARCE J.V. et MACHIN G., “Long-term monitoring of thermocouple stability with miniature fixed-point cells”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

FAILLEAU G., ARIFOVIÇ N., DEUZÉ T., DIRIL A., DURIS S., LANGLEY M., PEARCE J.V., SADLI M. et STRNAD R., “Investigation of the drift of a batch of base metal thermocouples at high temperature”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

FAILLEAU G., DEUZÉ T., JOUIN D., MOKDAD S., BRIAUDEAU S. et SADLI M., “A new CO-C eutectic fixed-point cell design for extending the calibration capacities”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

FAILLEAU G., ELLIOTT C.J., DEUZÉ T., PEARCE J.V., MACHIN G. et SADLI M., “Miniature fixed-point cell approaches for in-situ monitoring of thermocouple stability”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

GAVIOSO R.M., MADONNA RIPA D., TARIZZO P., MERLONE A., PITRE L. et TRUONG D., “Acoustic determinations of thermodynamic temperature between the mercury and indium fixed points”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

KOZLOVA O., BRIAUDEAU S., RONGIONE L., GUIMIER S., KOSMALSKI S., BOURSON F. et SADLI M., “Calibration of radiation thermometers up to 3000 °C: effective emissivity of the source”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

MACHIN G., ENGERT J., GAVIOSO R., SADLI M. et WOOLLIAMS E., “The EURAMET metrology research programme project: Implementing the new Kelvin (InK)”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

MCEVOY H.C., MARTIN M.J., STEINER A., SCHREIBER E., GIRARD F., BATTUELLO M., SADLI M., GUTSCHWAGER B., HOLLANDT J., DIRIL A. et PEHLIVAN Ö., “Euramet project to examine underlying parameters in radiance temperature scale realisation, 156 °C to 1000 °C”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

MOKDAD S., FAILLEAU G., DEUZÉ T., BRIAUDEAU S. et SADLI M., “A self-validation method for high-temperature thermocouples under oxidising atmospheres”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

PEARCE J.V., ELLIOTT C.J., FAILLEAU G., DEUZÉ T., BOURSON F., SADLI M. et MACHIN G., “Performance of Pt-C, Cr-C, and Ru-C fixed points for refractory thermocouple calibrations”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

PITRE L., SPARASCI F., RISEGARI L. et TRUONG D., “Acoustic thermometry: new results from 77 K to 303 K at LNE-CNAM”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

PITRE L., SPARASCI F., RISEGARI L. et TRUONG D., “Two measurements of the boltzmann constant kB using a quasi-spherical acoustic resonator”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

SADLI M., ANHALT K., BOURSON F., GRIGORYEVA I., KHLEVNOY B., LOWE D., MACHIN G., WANG T. et YAMADA Y., “Assessment of the long-term stability of hightemperature fixed point cells”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

SADLI M., BELLIN-CROYAT T., BOURSON F., DEUZÉ T., DIRIL A., FAILLEAU G., JOURNEAU C., LOWE D., MOKDAD S., PARGA C. et RICHARD N., “High-temperature fixed points for industrial applications”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

SPARASCI F., PITRE L., BUÉE B., CAPPELLA A. et GEORGIN E., “A new generation of hygrometers based on microwave resonant cavities: design and preliminary tests”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

YAMADA Y., ANHALT K., BATTUELLO M., BLOEMBERGEN P., KHLEVNOY B., MACHIN G., MATVEYEV M., SADLI M., TODD A. et WANG T., “Evaluation and selection of high-temperature fixed-point cells for thermodynamic temperature assignment”, Tempmeko 2013, Funchal, Madère, Portugal, 14–18 octobre 2013.

Publications

BOURSON F., SADLI M., ROUGIÉ B., BRIAUDEAU S. et KOZLOVA O., “Influence of the opening of a blackbody cavity measured at the Ag and Cu ITS-90 fixed points”, International Journal of Thermophysics, 35, 2014, 516-525, DOI: 10.1007/s10765-014-1610-8.

ELLIOTT C.J., FAILLEAU G., DEUZÉ T., SADLI M., PEARCE J.V. et MACHIN G., “Long-term monitoring of thermocouple stability with miniature fixed-point cells”, International Journal of Thermophysics, 35, 2014, 560-573, DOI: 10.1007/s10765-014-1597-1.

FAILLEAU G., DEUZÉ T., JOUIN D., MOKDAD S., BRIAUDEAU S. et SADLI M., “A New Co–C eutectic fixed-point cell for thermocouple calibration at 1324 °C”, International Journal of Thermophysics, 35, 2014, 1190-1201, DOI: 10.1007/s10765-014-1635-z.

FAILLEAU G., ELLIOTT C.J., DEUZÉ T., PEARCE J.V., MACHIN G. et SADLI M., “Miniature fixed-point cell approaches for in situ monitoring of thermocouple stability”, International Journal of Thermophysics, 35, 2014, 1223-1238, DOI: 10.1007/s10765-014-1667-4.

KOZLOVA O., BRIAUDEAU S., RONGIONE L., BOURSON F., GUIMIER S., KOSMALSKI S. et SADLI M., « Caractérisation d’un corps noir de transfert pour l’étalonnage de pyromètres jusqu’à 3 000 °C », Revue française de métrologie, 36, 2014, 29-37, DOI: 10.1051/rfm/2014015.

LAURIE M., FOURREZ S., FÜTTERER M.A., LAPETITE J.M., SADLI M., MORICE R. et FAILLEAU G., “Long term out-ofpile thermocouple tests in conditionsrepresentative for nuclear gas-cooled high temperature reactors”, Nuclear Engineering and Design, 271, 2014, 283-290, DOI: 10.1016/j.nucengdes.2013.11.049.

MACHIN G., ENGERT J., GAVIOSO R.M., SADLI M. et WOOLLIAMS E.R., “The Euramet Metrology Research Programme project Implementing the new Kelvin (InK)”, International Journal of Thermophysics, 35, 2014, 405-416, DOI: 10.1007/s10765-014-1606-4.

MCEVOY H.C., MARTIN M.J., STEINER A., SCHREIBER E., GIRARD F., BATTUELLO M., SADLI M., RIDOUX P., GUTSCHWAGER B., HOLLANDT J., DIRIL A. et PEHLIVAN Ö., “EURAMET Project to examine underlying parameters in radiance temperature scale realization, 156 °C to 1000 °C”, International Journal of Thermophysics, 35, 2014, 446-466, DOI: 10.1007/s10765-014-1595-3.

MOLDOVER M.R., GAVIOSO R.M., MEHL J.B., PITRE L., DE PODESTA M. et ZHANG J.T., “Acoustic gas thermometry”, Metrologia, 51, 2014, DOI: 10.1088/0026-1394/51/1/R1.

PEARCE J.V., ELLIOTT C.J., LOWE D.H., FAILLEAU G., DEUZÉ T., BOURSON F., SADLI M. et MACHIN G., “Performance of Pt-C, Cr7C3-Cr3C2, Cr3C2-C, and Ru-C fixed points for thermocouple calibrations above 1600 °C”, International Journal of Thermophysics, 35, 2014, 547-559, DOI: 10.1007/s10765-014-1567-7.

SADLI M., BOURSON F., DIRIL A., JOURNEAU C., LOWE D. et PARGA C., “Construction and in-situ characterisation of high-temperature fixed point cells devoted to industrial applications”, EPJ Web of Conferences, 77, 2014, DOI: 10.1051/epjconf/20147700018.

Communications

SADLI M., « Mesure précise de la température : de la redéfinition de l’unité à l’utilisateur », Séminaire de la filière « Instrumentation » de l’université Aix-Marseille, Marseille, France, 14 mars 2014.

SADLI M., “Self-validation techniques and path transmission corrections for radiation thermometry >2000 °C”, Workshop on industrial high temperature measurement solutions, Saint Denis, France, 15 Mai 2014.

OJANEN M., BRIAUDEAU S., SADLI M., ROUGIÉ B. et BOURSON F., “Intensity stabilized monochromatic radiance source for thermodynamic temperature determinations”, 12th International Conference on New Developments and Applications in Optical Radiometry (NEWRAD 2014), Helsinky, Finlande, 24-27 juin 2014.

SADOUNI A., KOZLOVA O., TRUONG D., BOURSON F., SADLI M. et BRIAUDEAU S., “Performances of the innovative portable spectroradiometer: rapid wide-range tunability and high reproducibility”, 12th International Conference on New Developments and Applications in Optical Radiometry (NEWRAD 2014), Helsinky, Finlande, 24-27 juin 2014.

PITRE L., SPARASCI F., RISEGARI L., GUIANVARC'H C., PLIMMER M.D. et HIMBERT M.E., “Improved apparatus to determine the Boltzmann constant using a large quasi-spherical acoustic resonator”, Conference on Precision Electromagnetic Measurements (CPEM 2014), Rio de Janeiro, Brésil, 24-29 août 2014, IEEE, DOI: 10.1109/CPEM.2014.6898331.

SPARASCI F., BELL S., EMARDSON R., FERNICOLA V., FLAKIEWICZ K., GEORGIN E. et JOHANSSON J., “Meteomet WP2 novel methods, instruments and measurements for climate parameters, achievements in the JRP Meteomet”, International workshop on Metrology for Meteorology and Climate, Brdo, Slovenie, 15-18 septembre 2014.

SPARASCI F., JOUIN D., DEUZÉ T., COEUR-JOLY G., SOURGEN D. et HERTZOG A., “Submillimetric thermistors up to lower stratosphere: preliminary characterization with 0.01 °C uncertainty”, International workshop on Metrology for Meteorology and Climate, Brdo, Slovenie, 15-18 septembre 2014.

SADLI M., « Traçabilité et incertitudes à haute temperature », 2e reunion du Groupe de Travail « Analyse thermique à haute temperature » du Groupement de Recherche Thermodynamique des Matériaux à Haute Température (GDR TherMatHT), Paris, France, 3 décembre 2014.