Publications
ARRHENIUS K., BÜKER O., HULTMARK S., BACQUART T., AARHAUG T., PERSIJN S., WORKUM D., KAISER S., DUFOND M., BASSET E. and MAURY R., “Parameters affecting the reliability of sampling during the assessment of the purity of hydrogen used as a vehicle fuel”, Measurement: Sensors, 2024, 38, DOI: 10.1016/j.measen.2024.101771.
BISSIG H., WRIGHT J., DOIHARA R., TSAI K.C., BATISTA E., ROMIEU K. and COURAGE F., “Comparison of primary standards for liquid flow - flow range (0.1 to 10) µL/min”, Metrologia, 2025, 62, 1A, DOI: 10.1088/0026-1394/62/1A/07015.
BISSIG H., WRIGHT J., ROMIEU K., BATISTA E., TSAI K.C. and DOIHARA R., “Comparison of primary standards for liquid flow in the range from 0.1 µL/min to 10 µL/min”, Measurement: Sensors, 2025, 38, DOI: 10.1016/j.measen.2024.101560.
DAUGBJERG T., CROUZIER L., DELVALLEE A., OGHEARD F., PECNIK C., ROMIEU K., SARAIVA F. and BATISTA E., “Measurement of wettability and surface roughness for metrology and quality control in microfluidics”, International Journal of Metrology and Quality Engineering, 2025, 16, DOI: 10.1051/ijmqe/2024021.
DE HUU M., MAURY R., MACDONALD M. and VENSLOVAS E., “Comparison of gravimetric standards for hydrogen refuelling stations”, Measurement: Sensors, 2025, 38, DOI: 10.1016/j.measen.2024.101563.
KAAL J., FELTIN N., LELONG M., YIN H., GLIDLE A., ROMIEU K. and BATISTA E., “Comparison of Measurement Protocols for Internal Channels of Transparent Microfluidic Devices”, Metrology, 2025, 5, DOI: 10.3390/metrology5010004.
KRISTOFFERSEN S.K., DEMEYER S., VINCENT P., RODRIGUES D., LE PICHON A., SCHWARDT M., FISCHER N. and LARSONNIER F., “Infrasound uncertainty propagation: Ensuring traceability from the laboratory to the field”, The Journal of the Acoustical Society of America, 2025, 157, 4, DOI: 10.1121/10.0036380.
LEFRANC B., SCHLEGEL C. and AVERLANT P., “Torque euramet supplementary comparison EURAMET.M.T-S4 (Euramet Project 1304) from 0.1 N·m to 5 N·m and from 5 N·m to 50 N·m”, Metrologia, 2025, 62, 1A, DOI: 10.1088/0026-1394/62/1A/07013.
NOVIANT S., DARTEVELLE C., SILVESTRI Z. and VISSIÈRE A., “Optical force balance for measurement in the nanonewton range”, Measurement, 2026, 259, DOI: 10.1016/j.measurement.2025.119746.
REZKI A., GUIANVARC'H C., SILVESTRI Z. and WALLERAND J.P., “Fabry-Perot refractometer for infrasound measurements”, IEEE Sensors Journal, 2025, 25, 5, DOI: 10.1109/JSEN.2025.3526868.
ROBERT C., KRUT S., COMPANY O., VISSIERE A., NOIRE P. and PIERROT F., “Spectral Identification of Inertial Parameters in Forced Sinusoidal Regimes”, Journal of Dynamic Systems, Measurement, and Control, 2026, 148, 4, DOI: 10.1115/1.4070775.
ROBINO M., FICI S., GUZZINI A., PELLEGRINI M., SACCANI C., MAURY R., SOUMARE H., MAZZOCCO L., KULAGA P., DUDEK A., GAJEC M., HOLEWA-RATAJ J., ENESCU D., SMORGON D., NOBAKHT R., CUCCARO R., GAIARDO A., VALT M., TESTI M. and BARTALI R., “Development of testing protocols for the measurement of pure and blended hydrogen in natural gas grids: An outlook from the THOTH2 project”, Measurement: Sensors, 2025, 38, DOI: 10.1016/j.measen.2024.101610.
THOMAS M., ESPEL P., DOUGDAG K. and ZIANE D., “Mass measurement noise improvement of the LNE Kibble balance, from 2017 to 2024”, IEEE Transactions on Instrumentation and Measurement, 2025, 74, DOI: 10.1109/TIM.2025.3572156.
THOMAS M., ZIANE D., ESPEL P., DOUGDAG K., BEAUDOUX F., MERLET S., ADDI N., COUËDO F. and TAUPIN M., “Calibration of two mass standards with the LNE Kibble balance in 2024”, Metrologia, 2025, 62, 6, DOI: 10.1088/1681-7575/ae1dfc.
WINTHER J.H., SCHIAVI A., DIAS R.S., CANU A. and LICHT T.R., “ILC investigation and in-field traceability using a high sensitivity & high mass geophone set”, Measurement: Sensors, 2025, 38, DOI: 10.1016/j.measen.2024.101759.
WONGTHEP P., OTAL P., RABAULT T. and SOYEZ O., “Final report of the supplementary comparison between NIMT and LNE on pressure standards in the range 50 MPa to 500 MPa of hydraulic gauge pressure”, Metrologia, 2025, 62, 1A, DOI: 10.1088/0026-1394/62/1A/07005.
Communications
BEAUDOUX F., “The dissemination of the mass unit in France…towards the end of standards?”, Oral presentation, International Metrology Congress CIM 2025, Lyon, France, 11-14 March 2025.
BLANC B., “Gravimetric standard leak artefact calibration”, Oral presentation, International Metrology Congress CIM 2025, Lyon, France, 11-14 March 2025.
DOUGDAG K., BEAUDOUX F. and ESPEL P., “First weighings with the LNE electrostatic balance of LNE”, Oral presentation, International Metrology Congress CIM 2025, Lyon, France, 11-14 March 2025.
ROMIEU K., “Characterisation of microfluidic transfer standards: results and challenges”, Oral presentation, International Metrology Congress CIM 2025, Lyon, France, 11-14 March 2025.
SEGALL D., “Improvements of the national standard for flows below 1 mg.s-1 nitrogen or dry air (50 SCCM)”, Poster, International Metrology Congress CIM 2025, Lyon, France, 11-14 March 2025.
SILVESTRI Z., “Development of two complementary methods for providing traceability of hydrogen leaks by flow measurement between 10-9 and 10-6 mol/s”, Poster, International Metrology Congress CIM 2025, Lyon, France, 11-14 March 2025.
THOMAS M., ESPEL P., DOUGDAG K. and ZIANE D., “Improvement of the mass measurement noise of the LNE Kibble balance”, Oral presentation, International Metrology Congress CIM 2025, Lyon, France, 11-14 March 2025.
ROGERS N., DANGEON-VASSAL L. and MAURY R., “Verifying the hydrogen flow of the future”, World Pipelines, 2025, https://www.worldpipelines.com/special-reports/13032025/verifying-the-hydrogen-flow-of-the-future/.
THOMAS M., ZIANE D., ESPEL P., DOUGDAG K. and BEAUDOUX F., “Mass metrology in the new SI at LNE”, 150th anniversary of the Metre Convention and the BIPM - Accepted Abstracts (poster online), 20 May 2025, https://thebipm150.org/posters-online/.
SARRAF C., “Development of Primary Standards for High-Frequency Dynamic Pressure Calibration”, Oral presentation, ICME 2025 : International Conference on Measurements of Energy, Orléans, France, 23-25 June 2025.
BATISTA E., SILVERIO V., ROMIEU K. and BÜKER O., “MFMET II A3.3.1 - Literature Survey on Requirements and Procedures with Regards to Burst Pressure”, Zenodo, 29 September 2025, DOI: 10.5281/zenodo.17224659.
DARTEVELLE C., NOVIANT S., PLIMMER M., SILVESTRI Z. and VISSIÈRE A., “Optical force balance for AFM cantilever stiffness calibration using passive magnetic levitation”, Poster, MacroScale Conference 2025, Buenos Aires, Argentina, 4-6 November 2025, https://cnam.hal.science/hal-05392432v1.
OGHEARD F., BATISTA E., BÜKER O., DAUGBJERG T.S., ROMIEU K. and SILVERIO V., “MFMET II A1.2.1 - Review of existing standardised methods for characterising pressure drop and flow resistance”, Zenodo, 28 November 2025, DOI: 10.5281/zenodo.18155039.
OGHEARD F., DAUGBJERG T.S., BATISTA E., SILVERIO V., YILDIRIM E., ROMIEU K. and KARTMANN S., “MFMET II A1.1.2 - Selection of Parameters for Particle-laden Flows Experiments and Simulations”, Zenodo, 28 November 2025, DOI: 10.5281/zenodo.18154963.