Publications
ARRHENIUS K., BÜKER O., HULTMARK S., BACQUART T., AARHAUG T., PERSIJN S., WORKUM D., KAISER S., DUFOND M., BASSET E. et MAURY R., “Parameters affecting the reliability of sampling during the assessment of the purity of hydrogen used as a vehicle fuel”, Measurement: Sensors, 2024, 38, DOI: 10.1016/j.measen.2024.101771.
BISSIG H., WRIGHT J., DOIHARA R., TSAI K.C., BATISTA E., ROMIEU K. et COURAGE F., “Comparison of primary standards for liquid flow - flow range (0.1 to 10) µL/min”, Metrologia, 2025, 62, 1A, DOI: 10.1088/0026-1394/62/1A/07015.
BISSIG H., WRIGHT J., ROMIEU K., BATISTA E., TSAI K.C. et DOIHARA R., “Comparison of primary standards for liquid flow in the range from 0.1 µL/min to 10 µL/min”, Measurement: Sensors, 2025, 38, DOI: 10.1016/j.measen.2024.101560.
DAUGBJERG T., CROUZIER L., DELVALLEE A., OGHEARD F., PECNIK C., ROMIEU K., SARAIVA F. et BATISTA E., “Measurement of wettability and surface roughness for metrology and quality control in microfluidics”, International Journal of Metrology and Quality Engineering, 2025, 16, DOI: 10.1051/ijmqe/2024021.
DE HUU M., MAURY R., MACDONALD M. et VENSLOVAS E., “Comparison of gravimetric standards for hydrogen refuelling stations”, Measurement: Sensors, 2025, 38, DOI: 10.1016/j.measen.2024.101563.
KAAL J., FELTIN N., LELONG M., YIN H., GLIDLE A., ROMIEU K. et BATISTA E., “Comparison of Measurement Protocols for Internal Channels of Transparent Microfluidic Devices”, Metrology, 2025, 5, DOI: 10.3390/metrology5010004.
KRISTOFFERSEN S.K., DEMEYER S., VINCENT P., RODRIGUES D., LE PICHON A., SCHWARDT M., FISCHER N. et LARSONNIER F., “Infrasound uncertainty propagation: Ensuring traceability from the laboratory to the field”, The Journal of the Acoustical Society of America, 2025, 157, 4, DOI: 10.1121/10.0036380.
LEFRANC B., SCHLEGEL C. et AVERLANT P., “Torque euramet supplementary comparison EURAMET.M.T-S4 (Euramet Project 1304) from 0.1 N·m to 5 N·m and from 5 N·m to 50 N·m”, Metrologia, 2025, 62, 1A, DOI: 10.1088/0026-1394/62/1A/07013.
NOVIANT S., DARTEVELLE C., SILVESTRI Z. et VISSIÈRE A., “Optical force balance for measurement in the nanonewton range”, Measurement, 2026, 259, DOI: 10.1016/j.measurement.2025.119746.
REZKI A., GUIANVARC'H C., SILVESTRI Z. et WALLERAND J.P., “Fabry-Perot refractometer for infrasound measurements”, IEEE Sensors Journal, 2025, 25, 5, DOI: 10.1109/JSEN.2025.3526868.
ROBERT C., KRUT S., COMPANY O., VISSIERE A., NOIRE P. et PIERROT F., “Spectral Identification of Inertial Parameters in Forced Sinusoidal Regimes”, Journal of Dynamic Systems, Measurement, and Control, 2026, 148, 4, DOI: 10.1115/1.4070775.
ROBINO M., FICI S., GUZZINI A., PELLEGRINI M., SACCANI C., MAURY R., SOUMARE H., MAZZOCCO L., KULAGA P., DUDEK A., GAJEC M., HOLEWA-RATAJ J., ENESCU D., SMORGON D., NOBAKHT R., CUCCARO R., GAIARDO A., VALT M., TESTI M. et BARTALI R., “Development of testing protocols for the measurement of pure and blended hydrogen in natural gas grids: An outlook from the THOTH2 project”, Measurement: Sensors, 2025, 38, DOI: 10.1016/j.measen.2024.101610.
THOMAS M., ESPEL P., DOUGDAG K. et ZIANE D., “Mass measurement noise improvement of the LNE Kibble balance, from 2017 to 2024”, IEEE Transactions on Instrumentation and Measurement, 2025, 74, DOI: 10.1109/TIM.2025.3572156.
THOMAS M., ZIANE D., ESPEL P., DOUGDAG K., BEAUDOUX F., MERLET S., ADDI N., COUËDO F. et TAUPIN M., “Calibration of two mass standards with the LNE Kibble balance in 2024”, Metrologia, 2025, 62, 6, DOI: 10.1088/1681-7575/ae1dfc.
WINTHER J.H., SCHIAVI A., DIAS R.S., CANU A. et LICHT T.R., “ILC investigation and in-field traceability using a high sensitivity & high mass geophone set”, Measurement: Sensors, 2025, 38, DOI: 10.1016/j.measen.2024.101759.
WONGTHEP P., OTAL P., RABAULT T. et SOYEZ O., “Final report of the supplementary comparison between NIMT and LNE on pressure standards in the range 50 MPa to 500 MPa of hydraulic gauge pressure”, Metrologia, 2025, 62, 1A, DOI: 10.1088/0026-1394/62/1A/07005.
Communications
BEAUDOUX F., “The dissemination of the mass unit in France…towards the end of standards?”, Présentation orale, International Metrology Congress CIM 2025, Lyon, France, 11-14 mars 2025.
BLANC B., “Gravimetric standard leak artefact calibration”, Présentation orale, International Metrology Congress CIM 2025, Lyon, France, 11-14 mars 2025.
DOUGDAG K., BEAUDOUX F. et ESPEL P., “First weighings with the LNE electrostatic balance of LNE”, Présentation orale, International Metrology Congress CIM 2025, Lyon, France, 11-14 mars 2025.
ROMIEU K., “Characterisation of microfluidic transfer standards: results and challenges”, Présentation orale, International Metrology Congress CIM 2025, Lyon, France, 11-14 mars 2025.
SEGALL D., “Improvements of the national standard for flows below 1 mg.s-1 nitrogen or dry air (50 SCCM)”, Poster, International Metrology Congress CIM 2025, Lyon, France, 11-14 mars 2025.
SILVESTRI Z., “Development of two complementary methods for providing traceability of hydrogen leaks by flow measurement between 10-9 and 10-6 mol/s”, Poster, International Metrology Congress CIM 2025, Lyon, France, 11-14 mars 2025.
THOMAS M., ESPEL P., DOUGDAG K. et ZIANE D., “Improvement of the mass measurement noise of the LNE Kibble balance”, Présentation orale, International Metrology Congress CIM 2025, Lyon, France, 11-14 mars 2025.
ROGERS N., DANGEON-VASSAL L. et MAURY R., “Verifying the hydrogen flow of the future”, World Pipelines, 2025, https://www.worldpipelines.com/special-reports/13032025/verifying-the-hydrogen-flow-of-the-future/.
THOMAS M., ZIANE D., ESPEL P., DOUGDAG K. et BEAUDOUX F., “Mass metrology in the new SI at LNE”, 150th anniversary of the Metre Convention and the BIPM - Accepted Abstracts (poster online), 20 mai 2025, https://thebipm150.org/posters-online/.
SARRAF C., “Development of Primary Standards for High-Frequency Dynamic Pressure Calibration”, Présentation orale, ICME 2025 : International Conference on Measurements of Energy, Orléans, France, 23-25 juin 2025.
BATISTA E., SILVERIO V., ROMIEU K. et BÜKER O., “MFMET II A3.3.1 - Literature Survey on Requirements and Procedures with Regards to Burst Pressure”, Zenodo, 29 septembre 2025, DOI: 10.5281/zenodo.17224659.
DARTEVELLE C., NOVIANT S., PLIMMER M., SILVESTRI Z. et VISSIÈRE A., “Optical force balance for AFM cantilever stiffness calibration using passive magnetic levitation”, Poster, MacroScale Conference 2025, Buenos Aires, Argentine, 4-6 novembre 2025, https://cnam.hal.science/hal-05392432v1.
OGHEARD F., BATISTA E., BÜKER O., DAUGBJERG T.S., ROMIEU K. et SILVERIO V., “MFMET II A1.2.1 - Review of existing standardised methods for characterising pressure drop and flow resistance”, Zenodo, 28 novembre 2025, DOI: 10.5281/zenodo.18155039.
OGHEARD F., DAUGBJERG T.S., BATISTA E., SILVERIO V., YILDIRIM E., ROMIEU K. et KARTMANN S., “MFMET II A1.1.2 - Selection of Parameters for Particle-laden Flows Experiments and Simulations”, Zenodo, 28 novembre 2025, DOI: 10.5281/zenodo.18154963.